- คำอธิบาย
- สอบถาม
LS-201-2 Constant Temperature and Humidity Test Chamber (80ล)
(Standard type)
ขนาดภายใน: W400 x D400 x H500mm
External size: W1050 x D980 x H1650mm
LS-201-2 Constant Temperature and Humidity Test Chamber (80ล)
มาตรฐานการออกแบบ:
GB11158 | High Temperature Test Chamber Technical Condition |
GB10589-89 | Low Temperature Test Chamber Technical Condition |
GB10592-89 | High-low Temperature Test Chamber Technical Condition |
GB/T10586-89 | Damp Heat Test Chamber Technical Condition |
GB/T2423.1-2001 | Low Temperature Test Chamber Test Methods |
GB/T2423.2-2001 | High Temperature Test Chamber Test Methods |
GB/T2423.3-93 | Damp Heat Test Chamber Test Methods |
GB/T2423.4-93 | Alternating Damp-Heat Test Methods |
GB/T2423.22-2001 | Temperature Changing Test Methods |
IEC60068-2-1.1990 | Low Temperature Test Chamber Test Methods |
IEC60068-2-2.1974 | High Temperature Test Chamber Test Methods |
GJB150.3 | High Temperature Test Methods |
GJB150.4 | Low Temperature Test Methods |
GJB150.9 | Damp Heat Test Methods |
LS-201-2 Constant Temperature and Humidity Test Chamber (80ล)
ใช้:
This equipment can simulate different environment condition. It’s appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.
LS-201-2 Constant Temperature and Humidity Test Chamber (80ล)
ข้อมูลจำเพาะ
รุ่น | LS-201-2-80 (A~F) | LS-201-2-150L (A~F) | LS-201-2-225L (A~F) | LS-201-2-408L (A~F) | LS-201-2-800L (A~F) | LS-201-2-1000L (A~F) |
ขนาดภายใน: WHD(ซม) | 40*50*40 | 50*60*50 | 60*75*50 | 60*85*80 | 100*100*80 | 100*100*100 |
External size: WHD(ซม) | 105*165*98 | 105*175*108 | 115*190*108 | 135*200*115 | 155*215*135 | 155*215*155 |
ช่วงอุณหภูมิ | (Low temp.:ก:+25℃; ข:0℃;ค:-20℃; ง:-40℃; จ:-60℃; ฉ:-70℃) (High temp.: + 150℃) | |||||
Humidity range | 20%~98% R.H | |||||
Temp analytic accuracy/ uniformity | 0.1℃/±2.0℃ | |||||
Temperature Fluctuation | ±0.5℃ | |||||
Humidity control accuracy | ±0.1%;±2.5% | |||||
Heat, cooling time | Heat up about 4.0°C/min ; Cooling about 1.0°C/min | |||||
Inner and outer materials | SUS#304 Stainless steel for inner chamber ; Carton Advanced cold plate nano paint for outer | |||||
Insulation materials | Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials | |||||
ระบบทำความเย็น | Air cooling/single segment compressor(-40องศาเซลเซียส) ,air and water double segment compressor (-50°C~-70°C) | |||||
Protection devices | Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch, super humidity over-temperature protection switch, fuse, failure warning system | |||||
Parts | Watching window , 50mm testing hole , PL internal bulbs , Wet and dry bulb gauze , partition plate , castorx4, Foot Cupx4 | |||||
Compressor | Original France“Tecumseh”brand | |||||
คอนโทรลเลอร์ | Taiwan, Independent R&D software | |||||
อำนาจ | AC220V 50/60Hz & 1 , AC380V 50/60Hz 3 | |||||
น้ำหนัก (กิโลกรัม) | 170 | 220 | 270 | 320 | 450 | 580 |
LS-201-2 Constant Temperature and Humidity Test Chamber (80ล)
1. รายการ 2. รุ่น | Constant Temperature and humidity test chamber 80ล |
3. การทำงาน | It simulates the products in the chamber where the climate condition of different temperature and humidity, such as high-low operation and storage, temperature cycling, high-low temperature and high-low humidity, moisture condensation etc. to check its adaptability and changing performance. It’s required to conform to international regulation (ไออีซี, เขา, กิกะไบต์, MIL…) to reach the consistency (including test schedule, condition, วิธี) under the international standard. |
4. ตัวอย่าง แอปพลิเคชัน | The chamber applies to: compatibility test for store, transportation and application of electric, ผลิตภัณฑ์อิเล็กทรอนิกส์, unit components, parts and other materials under high or low temperature. The following samples are prohibited to be tested and stored: – Inflammable , explosive and other volatile substances; – Corrosive substance; – Biont; – Strong electromagnetic emission source. |
5. ปริมาณ, ขนาด & น้ำหนัก | |
5.1. ปริมาณ 5.2. Internal size 5.3. Exterior size 5.4. น้ำหนัก | 80ล ว 400 x H500 x D400mm W1050 x H1650 x D980mm 170กิโลกรัม |
6. ผลงาน | |
6.1. Test condition | อุณหภูมิ:+25℃, ความชื้น: ≤85%, no samples in the chamber |
6.2. วิธีทดสอบ | GB / T 5170.2-1996 Temperature test chamber GB/T5170.5-1996 Temperature and humidity test chamber (only temperature and humidity) |
6.3. ช่วงอุณหภูมิ | -40℃→+150℃ (adjustable) |
6.4. ความผันผวนของอุณหภูมิ | ±0.5℃ |
6.5. Temperature accuracy distribution | ±2.0℃ |
6.6. Humidity range | 20%~98%R.H (temperature at 20℃-85℃) |
6.7. Humid. fluctuation | ±2.5%R.H. |
6.8. Humidity accuracy distribution | ±3.0%. |
6.9. Heat-up time | -40℃ → +150℃ Heat up for 2-4.0℃/min |
6.10. Cooling time | +150℃→ -40℃ Cooling for 0.7-1.0℃/min |
6.11. Load condition | Testing space is not more than 3/4 of the total space, no heating |
6.12. Sample holder | Stainless steel punching stencil |