Initial adhesive tester in the use of the process to do a good job of maintenance, only good maintenance can prolong the service life, let’s look at the maintenance of the initial adhesive tester:
Short-time maintenance:
1, to regularly check whether the vent of the initial adhesion tester is blocked, and clean up the dust.
- Check whether the current and voltage of the equipment are normal and whether the line is aging.
- Check whether the initial adhesion tester works normally.
- Clean the dust in the inner cavity of the equipment.
Long maintenance:
- Check whether the circuit and switch are normal.
- Check whether all power supplies of the equipment are normal.
- The transformer insulation of the initial adhesion tester is not less than 5 megohm. If it cannot be reached, the transformer must be re-dried.
4, the adjustable mechanical parts of the full range of adjustment, the number of not less than 3 times.
- Calibrate the accuracy of the equipment once every 2 times of maintenance.
The above is about the maintenance method of the initial adhesion tester, I hope we should do a good job in maintenance of the related work.