LS-208 Wet And Dry Combined Salt Spray Tester

LS-208   Wet And Dry Combined Salt Spray Tester

Meet the standards:

GB/T5170.8, GB/T10587, GJB150.11, GB/T10125, GB/T2423.17, etc.

DIN50021 DIN50017 DIN50907 ISO 11977 ISO 9227 ASTM B117

ASTM G85 automobile and other industrial specifications.

LS-208  Wet And Dry Combined Salt Spray Tester

1.Experimental space: 900×600×500(W×D×H)mm other sizes can be customized

2.Outer space: according to the actual size

3. Power supply: 380V 6KW 50HZ MAX 30A
4. 4. Materials:

(A) imported PVC board is adopted in the laboratory, which is acid and alkali resistant.

(B) imported PVC board in the outer box, resistant to acid and alkali.

(C) the test replenishment tank is equipped with a hidden water table, which is easy to clean and not easy to break.

(D) the saturated air barrel adopts SUS#304 stainless steel high-pressure barrel with the best insulation effect.

LS-208  Wet And Dry Combined Salt Spray Tester

5, according to customer test requirements, can be set the salt dry and wet composite test

Salt spray test – moisture/Wet test

(A) brine spray laboratory: NSS, CASS

(1) laboratory: 10℃ ~ 50 ℃

(2) saturated air bucket: 47℃ ±1℃

(B) moisture test:

(1) temperature: 40℃ ±2℃

(2) humidity: more than 93%~100%

(2) saturated air bucket: 47℃ ±1℃

(C) drying test:

(1) temperature: 15℃~50℃ ±1℃

(2) humidity: over 30%

6. Air supply system

The air pressure is 1kg/cm2, which can be adjusted in two stages. The first is the imported pressure regulating filter with the function of filtering water.

Adjust to 2-2.5kg/ cm2 roughly, the second is the imported precision pressure regulating valve, adjust to the pressure gauge 1kg/ cm2.

7. Spray method:
8. Apply bernouldt principle to take and absorb salt water and atomize it, the atomization degree is even, without blocking crystallization, to ensure the standard of continuous test.
9. Nozzle: made of special glass nozzle, the size and Angle of spray can be adjusted.
10. Spray volume: adjustable 1.5± 0.5ml 80cm2/Hr (16-hour average volume).
11. large brine storage tank, 48HR continuous spray.

LS-208 Wet And Dry Combined Salt Spray Tester

8.Heating system:

External hot air heating method is adopted to reduce standby time and component damage rate.

S.S.R control heating power, accurate temperature, low power consumption.(titanium alloy corrosion prevention tube for electric heat pipe)

9. Circuit control system
10. The main controller adopts 7-inch LCD human-machine interface, and the main screen can plan the test program.
11. The fixed time can be set 0-999 H 59 MIN.
12. The program mode can set salt spray and moisture test at the same time
13. With power off memory device, the remaining program can be continued when power back.
14. The rise and drop of temperature can be used for speed control and self-calibration of temperature and humidity reference points.
15. Temperature and humidity sensor the DIN PT – 100 Ω (platinum).

LS-208 Wet And Dry Combined Salt Spray Tester

10.Inlet and drainage system:

The water inlet adopts the automatic water replenishment system. When the water level is too low, it will be replenished automatically, and manual water replenishment can be used.

Drainage water pump with acid, alkali and corrosion resistance, increase the service life, reduce the waiting time for drainage.

All pipeline accessories are imported acid-alkali corrosion resistant components, long life.

11.. Humidification system:

1. Electronic bit mode P.I.D micro humidification system is adopted.
2. Attached overheat and overflow double protection device.
3. The humidification and dehumidification systems are completely independent.
4. Water level control mining height molecular floating ball water valve.
5. Automatic humidifying water replenishment device.(the machine should be connected to the water source)
6. 12. Dehumidification system

The evaporator condenses and dehumidifies, and the humidity is stable.

Bubble acceleration humidifier, humidity stability rate is fast.

Adopt high speed return air extraction system.

13. 13. Safety protection device:
14. With leakage power off type no fuse protection switch.
15. Low water level protection switch.
16. Low-salt protection switch
17. Double overtemperature protection device can prevent mechanical or electronic movement from losing control.
18. Failure point Chinese indication screen.
19. 14. Contents:
20. 6 shelves
21. Two standard measuring tubes
22. 2 glass filters
23. Collector 80cm2 2
24. 2 glass nozzles
25. Attachment: 500g of test drug sodium chloride (NACL), 2 bottles of operation manual, 1 copy
26. Operating environment:performance guarantee environment temperature range :+5℃ ~ +30℃ (but the lowest available temperature, the highest thermal load energy

Force and cooling time excepted)

17. Power supply:380V three-phase 50HZ MAX 30A