SPA-2600 Atmospheric Plasma Cleaning Machine

SPA-2600 大気プラズマ洗浄機

説明
問い合わせ

SPA-2600 大気プラズマ洗浄機

たhe Profile:

SPA – 2600 Atmosphere Plasma cleaning machine (プラズマクリーナー), is a in the atmospheric environment cleaning, activation, etching the surface of the product, usually served with a jet spray gun head of spray gun, the main processing, processing small area tracking accuracy is high, the bottom part of material, is paste in various industries, welding, 印刷, point glue easily off such problems as “Nemesis”.Plasma cleaning as a product surface printing, 梱包, fitting, コーティング, welding, viscose, coating process, is an important part of product upgrading, capacity expansion, cost reduction.

SPA-2600 大気プラズマ洗浄機

1.1 製品の特徴:

1.Compact machine, wide application range, professional, efficient, accurate, lasting, 環境を守ること, and flexible configuration, cost-effective

2.Can be combined with the production line, can be continuous operation, improve the production speed

3.Low gas cost（CDA/N2）,cost saving

4.Advanced in the industry Full-bridge inverter circuit;

5.Patented high voltage generator design;

6.Patented gun head design,No ESD generated

7.Unique patent discharge technology, high plasma concentration.

SPA-2600 大気プラズマ洗浄機

1.2 私ndustrial Aひだ:

1.3.C industry: phone assembly bonding, カメラモジュール, earphone bonding, mid frame bonding

2.ディスプレイ産業: TP state

3.Automotive industry bonding: headlights, steering wheel, EPDM seal, windshield, automotive electronics

4.Connector industry: cable character printing

5.Clock industry: bonding, inlaying, bonding

6.Plastic industry: surface activation, bonding, screen printing

7.Metal industry: gold plating, silver plating, welding, removal of residual organic matter

8.Glass industry: coating film, ink printing, コーティング, paste

SPA-2600 大気プラズマ洗浄機

2.1 Equipment NSpecifications:

Plasma power main machine specification
Case size	560452186mm（LWH）
重さ	20KG
Input Power	220V，50/60Hz，3 ライン，50A
mains frequency	20-50KHz
Plasma output	300-500W adjustable；Choosable 200-300W (ultra-low power version, with muffler head, temperature 40-60℃)
制御モード	I/O port
alarm	Overload protection, short circuit protection, circuit break protection, temperature protection
Plasma power gun head specification
Spear head size	As shown in the following equipment drawing
Gun nozzle specifications	1.Optional normal jet direct injection 2mm, 3んん, 5んん, 10mm standard with nozzle 2. 2.Flat nozzle jet direct injection 10mm, 15んん
Spear head weight	3KG
Plasma cleaning height	5-20んん
Effective plasma treatment width	2-15んん
High tension line long	3.5 m（ 6 m We can customize the）

2.2.工場仕様:

工場仕様

AC電源仕様

電源：AC220V，50/60Hz，3 ライン，50A

工場排気

Flow quantity :2.0 m3/分

プレッシャー：-280~-350 Pa

texture：Corrosion resistant material

Factory compressed air requirements

flow：25Lpm

プレッシャー：3~7 kg/cm2

pipe diameter:8×5mm

texture：PUパイプ

dew point temperature：-40℃below

粒子＞0.3μm：10個/ft3

2.3.NS一般的に R要件:

General Requirements
Device rotation rate		continuous operation 95% above
リスクの特定		高圧の危険性の特定
service environment		NDJシリーズ粘度計：15～30℃ Humidity ：30~80%
Else matters need attention		可燃性ガスがないこと, 腐食性ガス, 爆発または反応性粉塵
Consumable materials list
Project	Serial number		Quantity	Service life	述べる
述べる	DYT002		1	5000 hour
Nozzle	DYT013		1	5000 hour

述べる:

Do not change consumables without training.
Please turn off the power for more than 20 minutes before replacing consumables, and make high voltage prot