- Deskrip
- Pagtatanong
LS-210 Tatlong Kahon thermal Shock Chamber
Gamitin
Programable thermal shock chamber price is used to test the change of material under extremely high temperature and extremely low temperature environment that continue alternation in the shortest time,Testing the chemical changes or physical damage of material caused by the thermal expansion and contraction. Testing box divided two parts, one is hightemperature region, another is low-temperatureregion, the testing sample placed on the moving basket, using unique heat storage and cool storage,the cylinder taking basket moves up and down in the hot and cold region to complete the hot and cold temperature impact testing.
LS-210 Tatlong Kahon thermal Shock Chamber
Pagtutukoy
Modelo | A (A~D) | B (A~D) | C (A~D) | D (A~D) | E (A~D) | F (A~D) |
Sukat ng panloob na sukat: WHD(cm) | 40*35*30 | 50*30*40 | 50*40*40 | 50*50*40 | 60*40*50 | 60*50*50 |
Panlabas na laki: WHD(cm) | 150*180*150 | 160*175*160 | 160*185*160 | 160*185*170 | 170*185*170 | 170*195*170 |
Temperatura hanay(Subukin ang Kamara) | mataas na temperatura:+60℃~+200℃;low temperature -10℃~-65℃(A:-45°C;B:-55°C;C:-65°C) | |||||
Heating Time | RT~200℃ About 30min | |||||
Cooling Time | RT~-70℃ About 85min | |||||
Temperature Conversion Time | Less than 10S | |||||
Temperature Recovery Time | Less than 5min | |||||
Temperature Deviation | ±2.0°C | |||||
Temperatura Fluctuation | ±0.5°C | |||||
Materyales | External material: SUS#304 Stainless steel plate Internal material:SUS#304Stainless steel plate | |||||
Output Mode | Water-cooled or air-cooled,Taikang compressor in France | |||||
Controller | TEMI South Korea | |||||
Cooling System | Water-cooled or air-cooled,Taikang compressor in France | |||||
Mga aparato ng proteksyon | Fuse switch, compressor sobrang load switch, refrigerant high and low pressure protection switch,sobrang kahalumigmigan labis na temperatura proteksyon switch, piyus, sistema ng babala sa kabiguan | |||||
patrs | Window ng panonood;50mm testing butas; partition plat | |||||
Kapangyarihan | AC380V 50/60Hz Three-phase four-wire ac power | |||||
timbang (kg) | 750 | 790 | 830 | 880 | 950 | 1050 |
LS-210 Tatlong Kahon thermal Shock Chamber
1. Profile. | |
1.1 Aytem | Thermal shock test chamber (three zone) |
1.2 Modelo | LR-B010 |
1.3 Sample restrictions
| The equipment is prohibited to do the test and storing as below: – Flammable, explosive, volastile substances; – Corrosive substances; – Biological samples; – Source of strong electromagnetic radiation. |
1.4 Test condition | Envrionmental temperature: +25°C; halumigmig: ≤85%, with no samples inside the chamber |
1.5 Paraan ng pagsubok | GB/T 5170.2-1996 temperature test chamber and so on |
1.6 Meet the test standard | Meet GB2423, IEC68-2-14, JIS C 0025, MIL-STD-883E, IPC 2.6.7, BELLCORE and other standards |
2. Teknikal na mga parameter. | |
Sukat ng panloob na sukat (WxHxD)mm | 400×350×300mm |
Inner volume | 42L |
Panlabas na laki (WxHxD)mm | 1550x1650x 1470mm |
Preheating temperature | +60℃~+200℃ (heat up +25℃~+200℃∕ 20min) |
Precooling temperature | -10℃ ~-45℃ (cooling +25℃~-45 ℃∕65min) |
High temp. shock range | +60℃~+150℃ |
Low temp. shock range | -10℃~-40℃ |
Temperatura pagbabago | ±0.5°C |
Temperature deviation | ±2.0°C |
Shock recovery time | ≤5min (control point) |