IEC 60061 7006-27b-1 Lamp Holder Gauge Go Gauge

Beschreibung
Anfrage

IEC 60061 7006-27b-1 Lamp Holder Gauge Go Gauge

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
E27 Lamp holder gauge name
Erfüllen Sie den Standard: IEC 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1
E27 Lamp holder Solder Height Gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (anti-electric shock) 7006-51A-2

Reference	Abmessungen(mm)	Toleranz(mm)	Limit after wear(mm)
d	26.45	+0.03/-0	26.50
d1	24.26	+0.03/-0	24.31
L.	16.5	±0,1
O	28	±0,2
P	3.629	–
r	1.025	–
T	22.0	+0.0/-0.03
V.	15	±0,1
W.	5	±0,1

The shape part of the edge of the thread shall be broken with radius of 0.2mm to 0.3mm.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
Purpose:

To check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
Testing

When the cap on a finished lamp has been screwed into the gauge as far as it will go, the center contact shall be co-planar with, or project beyond, surface X.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
E27 Lamp holder gauge name
Erfüllen Sie den Standard: IEC 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1
E27 Lamp holder Solder Height Gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (anti-electric shock) 7006-51A-2

Reference	Abmessungen(mm)	Toleranz(mm)	Limit after wear(mm)
d	26.45	+0.03/-0	26.50
d1	24.26	+0.03/-0	24.31
L.	16.5	±0,1
O	28	±0,2
P	3.629	–
r	1.025	–
T	22.0	+0.0/-0.03
V.	15	±0,1
W.	5	±0,1

The shape part of the edge of the thread shall be broken with radius of 0.2mm to 0.3mm.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
Purpose:

To check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
Testing

When the cap on a finished lamp has been screwed into the gauge as far as it will go, the center contact shall be co-planar with, or project beyond, surface X.