- Beschreibung
- Anfrage
E26 7006-29-3 Contact performance gauge
IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
E26/E26d lamp cap gauge
Produktname :E26 lamp holder gauge Technical standard :GB 1483/ IEC 60061-3
E26 Lamp cap gauge Classification:
IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
- The value is for lamps fitted with E26/24 caps. For lamps fitted with E26/25 caps, dimension K is 29.3mm.
- The value is for lamps fitted with E26/24 caps. For lamps fitted with E26/25 caps, dimension M is 25.9mm.
- The gauge is shown in the test position. In the rest position the plunger shall be above plane V.
- Only for E26/24
IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
Purpose:
To check lamp dimensions for contact making in IEC holders.
IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
Testing :
The shape of the lamp with regard to the fit in the lampholder is assured to be correct. If the lamp can be pushed into the gauge till plane W reaches plane V or project beyond it.
For E26/24 capped lamps, when surfaces V and W are coincident, the top of the cap including any solder or conductive material, shall not extend above surface X.