- 描述
- 查询
LS-3520 Moisture Analyzer
采用
Rapid moisture tester, its operation is simple, easy to observe and with its excellent performance is fully used in food, 烟草, 制药, 油, paper making, 喂养, 化学工业, 涂层, 矿业, 环境保护, geology and other industries for rapid determination of moisture content of material, at the same time meet the solid, particles, 粉末, gel body and liquid moisture content measurement requirements
LS-3520 Moisture Analyzer
特征:
1.Fast and uniform halogen lamp heater with innovative SRA technology
A straight halogen lamp and a specially designed SRA (secondary radiation assist device) radiator are used to shorten the measurement time and form a fast and uniform heater.
2.High accuracy
The use of SHS quick and sensitive characteristics of the weight sensor, so that very few samples in the high-precision weighing can be very accurate determination of moisture content.
3.Sodium tartrate dihydrate is used as the standard for measuring water content accuracy
Sodium tartrate dihydrate is a chemical substance with a stable moisture content of 15.66% 0.3/-0.1, so it is most reliable for precision inspection and provides reference value for the tester.
4.Heater temperature calibration (MS/MX only)
Optional temperature calibrator, calibration results can be output in the format of GLP, 良好生产规范, ISO标准.
5.Standard winct-moisture software (MS/MX only) for real-time graphic display
Winct-moisture Moisture software is a Moisture content analysis software specially designed for graphic display, which can show the graph of Moisture content change during measurement and can set the measurement program of different samples by computer aided analysis according to the graph.
6.Measurement procedures, measurement results storage function
取决于 20 sets of measurement procedures can be stored, and different measurement procedures can be called at any time according to different samples for moisture content determination. 当使用摆杆 Sunny 测试仪测量涂层厚度时, rapid measurement can be realized and operation errors can be avoided (MF can store up to 10 groups and ML can store up to 5 团体).The measurement results can be stored in 100 团体 (MF 50 团体,ML 30 团体) and output by computer or printer, completely avoiding human error.
7.Comply with GLP/GMP/GCP and ISO standards, with date/time, ID, calibration data and test record output
Ability to record and output calibration and measurement data to meet quality management and certification requirements.
8.Standard rs-232 interface
Communicate with PC or connect to printer.
9.Large screen fluorescence display with clear and easy to observe
The measurement procedure, set value, moisture content change rate, measurement status, data number and other important information are clearly displayed at the same time.
10.The parts are easy to operate
Ergonomically designed disc handle to avoid accidents such as burns when hot samples are placed or removed. Wing handle makes heating cover easy to open and close.
11.Guarantee of low maintenance cost
Users do not need to stop using when replacing the halogen lamp, and the small room with protection is easy to clean (the life of the halogen lamp is about 5000 小时).
12.Five measurement procedures
Standard mode: automates measurement by setting high, medium and low measurement accuracy.
Automatic mode: when the rate of moisture change is less than a set ratio, the measurement will be automatically ended.
Fast mode: in order to realize rapid determination to start the first 3 minutes with 200 ℃ heating, then according to the set to complete the measurement automatically.
Timing mode: the measurement is completed by setting the duration.
Manual mode: operate the measurement process by pressing the start and stop buttons.
13.Four drying procedures
Standard drying: directly raise the temperature to the set temperature after starting.
Asymptotic drying: gradually rising to the set temperature after a preset time.
Step drying: adopt different temperature according to time.
Quick drying: 200 ℃ rapid heating after 3 minutes based on continuous heating drying temperature setting.
Any combination of measurement procedure and drying procedure can fully meet the determination requirements of different samples.
LS-3520 Moisture Analyzer
显示模式:
Ax-mx-31 sample tray (100 件)
Ax-mx-32-1 glass fiber sheet (直径: 70毫米,100 床单)
Ax-mx-32-2 glass fiber sheets (直径: 78毫米 100 床单)
Ax-mx-33 test sample (30 g sodium tartrate dihydrate,12 件)
Ax-mx-34 halogen lamp tube (ac200-240v)
Ax-mx-40 rs-232 cable (2 米, 25 到 9 stitches)
Ax-mx-41 calibration weight (20 G,OIML)
Ax-mx-43 temperature calibrator (MS/MX only)
LS-3520 Moisture Analyzer
规范
模型 | LS-3520-70 | LS-3520-50 | LS-3520-50 | |
测试方法 | 400W straight tube halogen lamp heating system with SRA radiator and SHS weighing technology | |||
Sensor type | SHS sensor | |||
Weighing scale | 71G | 51G | 51G | |
Weighing accuracy | 0.0001G | 0.001G | 0.002G | |
Humidity display accuracy | 0.001%0.01%/0.1% | 0.01/0.1% | 0.05/0.1/1% | |
Humidity accuracy | > 1G | 0.05% | 0.10% | 0.20% |
> 5G | 0.01% | 0.02% | 0.05% | |
Heater technology | Halogen lamp (straight tube, 最大限度. 400w ^,5000 小时) | |||
Drying temperature | 30-200℃ | 50-200℃ | ||
Measuring program | 20团体 | 10团体 | ||
Measuring way | Standard/automatic comparison/timing/manual | |||
Humidity display mode | Relative humidity/absolute humidity/dry-wet ratio/wet-dry ratio | |||
Display type | Large screen fluorescence display | |||
Connector | RS-232 | |||
Data storage function | 100团体 | 50团体 | ||
Operate environment | 5-40℃,less than 85%RH | |||
GLP/GMP/ISO | Standard function | |||
Self-checking function | 标准 | |||
Communication software | WinCT-Moisture standard software | WinCT standard software | ||
Sample tray size | Diameter 85MM(optional 110mm) | |||
功率 | AC100-120V or AC200-240V,50/60Hz about 400W | |||
External dimensions/weight | 215x320x173/about 6kg | |||
标准配件 | 20 sample plates,2 disk handles, photo, sample keys, test samples, cd-rom, display film, dust cover, 用户手册, quick access card, 电源线, two fuses. |