- 描述
- 查询
Lamp holder anti-accident contact gauge
恒温恒湿试验箱 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
E27 Lamp holder gauge name
Meet the standard: 恒温恒湿试验箱 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1E27 Cap solder Height gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (防触电) 7006-51A2
The plunger of the gauge is shown in the test position. When the plunger is at rest, surface W shall be retracted deeper than surface V.
| d | 26.55 | +0.0/-0.02 | ñ | 32 | +0.0/-0.02 |
| F | 27.2 | +0.05/-0.0 | 氧 | 34 | +0.0/-0.2 |
| 触摸屏技术的完美融合 | 32 | +0.02/-0.0 | P | 6 | 显示模式 |
| H | 14 | 显示模式 | Q | 3 | 显示模式 |
| Ĵ | 36 | +0.2/-0.0 | 微信图片_20210114172128 | 10 | 显示模式 |
| ķ | 28.4 | +0.0/-0.02 | r | 2.5 | +0.5/-0.0 |
| 中号 | 30.8 | +0.0/-0.02 |
恒温恒湿试验箱 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
目的:
To check protection against accidental contact during insertion of caps E27 on finished lamps.
恒温恒湿试验箱 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
Testing :
The shape of the lamp with regard to protection against accidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
恒温恒湿试验箱 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
E27 Lamp holder gauge name
Meet the standard: 恒温恒湿试验箱 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1E27 Cap solder Height gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (防触电) 7006-51A2
恒温恒湿试验箱 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
目的:
To check protection against accidental contact during insertion of caps E27 on finished lamps.
恒温恒湿试验箱 60061 7006-51A-2 Lamp holder Anti-accidental contact specification E27
Testing :
The shape of the lamp with regard to protection against accidental contact is assumed to be correct if, when the lamp is pushed as far as possible into the gauge, surface W does not protrude beyond surface V.
