- 描述
- 查询
Introduction-3nh YS6003 desktop Color spectrophotometer
YS6003 desktop spectrophotometer can accurately measure and express various color difference formulas and color indexes in a variety of color spaces. The built-in temperature sensor monitors and compensates the test environment to ensure more accurate measurement results. It is widely used in reflection samples, transparent samples color transfer and quality control in plastic electronics, 油漆和墨水, textile and garment printing, printing and other industries.
Features-3nh YS6003 desktop Color spectrophotometer
1, High configuration of hardware: 7 inches TFT Color Capacitive Touch-screen Display; 蓝牙 2.1; 凹面光栅.
2, Double Array 256 Image Element CMOS Sensor; Long life-span stable xenon lamp.
3, With reflective and transmissive spectrum, accurate Lab value, good to calculate color formula and do precise color transmission.
4, Auto identify measuring aperture. Freely switchable between 3 measuring apertures: Φ 25.4mm/8mm/4mm.
5, Built-in temperature sensor to monitor and compensate the measuring temperature to ensure the measurement more precision.
6, Wavelength range 360nm – 780nm.It can be used to test fluorescent samples with wide applicability and simple operation
7, Independent light source detector to ensure the light source reliable.
8, Multiple measurement modes: Quality Management Mode, Sample Mode; Meet more users’ requirement.
9, Multiple accessories, sample holders, fixation clamp, suitable to more working condition.
10, Big capacity data storage, for 20000 pieces test result.
11, Built-in camera locating.
12, More powerful extended functions at the PC software.
Specifications-3nh YS6003 desktop Color spectrophotometer
| 模型 | YS6003 |
| 光学几何 | 反映: 从:8°, 的:8°(漫射照明, 8-度 视角);SCI (包括镜面反射成分)/SCE (排除镜面反射成分) ; 包括紫外线 / 排除紫外线光源; 透过率: 从:0°, 的:0° (diffuse illumination: 0° viewing); SCI (包括镜面反射成分)/SCE (排除镜面反射成分) ; 阴霾(ASTM D1003); Conforms to CIE No.15,GB/T 3978,GB 2893,GB/T 18833, ISO7724/1, ASTM E1164, DIN5033 Teil7 |
| 应用 | It is used for accurate analysis and transmission of laboratory color. Apply in paints, 墨水, 纺织品, garments, 印染, printing etc industries for color transfer and quality control. |
| 积分球尺寸 | Φ154mm |
| 光源 | 360 纳米到 780 纳米, LED组合灯 (5 million life span) |
| 分光光度模式 | 凹面光栅 |
| 传感器 | 256 像元双阵列CMOS图像传感器 |
| 波长范围 | 360-780纳米 |
| 波长间隔 | 10纳米 |
| 半带宽度 | 10纳米 |
| 测量反射率范围 | 0-200% |
| 测量孔径 | Reflective : Φ30mm/Φ25.4mm, Φ10mm/Φ8mm, Φ6mm/Φ4mm; Transmissive : Φ30mm/Φ25mm; 评论: 1. Automatic identification of switch caliber 2. Customized Configuration caliber and lens position |
| 镜面反射分量 | 反射率: SCI&SCE / 透过率: SCI&SCE |
| 色彩空间 | CIE实验室,XYZ,x,胆碱,CIE LUV,Musell,s-RGB,猎人实验室,βxy,DIN Lab99 |
| 色差公式 | ΔE* ab,ΔE*紫外线,ΔE*94,ΔE*cmc(2:1),ΔE*厘米(1:1),E*00, DINΔE99,ΔE(猎人) |
| 其他比色指数 | WI (ASTM E313, CIE / ISO, 空中交通管制中心, 猎人), YI (ASTM D1925, 哮喘 313), 的 (ASTM E313, CIE / ISO), MI (Metamerism Index), 染色牢度, 色牢度, 颜色强度, 不透明度, 8° 光泽度,Gardner Index, Pt-Co Index, 555 Index, 阴霾(ASTM D1003) |
| 观察者角度 | 2°/10° |
| 照明 | D65,A,C,D50,D55,D75,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12 |
| 显示数据 | 频谱图/值, 样品色度值, 色差值/图表, 通过/失败结果, 颜色偏移 |
| 测量时间 | About 2.4s (衡量SCI & SCE about 5s) |
| 重复性 | 光谱反射率: Φ25.4mm/SCI, 内的标准差 0.06% (400 纳米到 700 纳米: 内 0.05%); 色度值:Φ25.4mm/SCI, ΔE*ab 内的标准偏差 0.01 ( 测量白色校准板时 30 次在 5 白色校准后的第二个间隔); Spectral Transmittance: Φ25.4mm/SCI, 内的标准差 0.06% (400 纳米到 700 纳米: 内 0.06%); 色度值:Φ25.4mm/SCI, ΔE*ab 内的标准偏差 0.015 ( 测量白色校准板时 30 次在 5 白色校准后的第二个间隔). |
| 仪器间误差 | Φ25.4mm/SCI, ΔE*ab以内 0.15 (平均值 12 BCRA 系列 II 彩砖) |
| 方面 | L*W*H=370x300x200mm |
| 重量 | Approx. 9.6公斤 |
| 功率 | AC 24V, 3A Power adapter power supply |
| 照明寿命 | 5 年, 多于 3 百万次测量 |
| 展示 | 7-英寸TFT彩色液晶显示器, 电容式触摸屏 |
| 数据端口 | USB & Print serial port |
| 数据存储 | 标准 1000 件, 样本 20000 件 |
| 语言 | Simplified Chinese, Traditional Chinese, 英语, |
| 操作环境 | 0~40℃, 0~85%RH (无冷凝), 高度 < 2000米 |
| 存储环境 | -20~50℃, 0~85%RH (无冷凝) |
| 标准配件 | 电源适配器, 用户指南, CD Disk(电脑软件), USB电缆, Standard Calibration Board, Black Calibration Cavity, Transmission black baffle, 强电磁辐射源, 25.4 caliber, 8 caliber, 4 caliber |
| 可选配件 | Micro-printer, Transmissive Test Component, Micro Aperture(4毫米) transmission test clamp component, Instrument inversion components |
| 笔记: 规格如有更改，恕不另行通知. YS6003 quality management software can only be used for data management | |
