LS-114 Small plate vulcanizing machine（Lab use）

LS-114 Small plate vulcanizing machine（Lab use）

Огляд

This series of plate vulcanizing machine is used for pressing all kinds of rubber model products and non-model products, and also can be used for pressing all kinds of thermosetting plastics and foaming rubber and plastic products.With independent power mechanism and electrical system, using the button control.Working pressure and heating temperature can be adjusted within a certain range.This machine is divided into two types: manual and semi-automatic

LS-114 Small plate vulcanizing machine（Lab use）

Галузь застосування

Laboratory small plate vulcanizing machine is also called hot press molding machine, mainly used for rubber, plastic products sample making experiments, як от: tensile test, impact test, compression test sample preparation.

Plastic industry: laboratory sample making, small batch trial production, research and development,PPT,PE,PVC and so on.

Rubber industry: laboratory sample making, small batch trial production, research and development, natural rubber, силіконові, силіконова гума, тощо.

LS-114 Small plate vulcanizing machine（Lab use）

Технічні параметри

1. Capacity: 5-25ton (регульований) [with automatic exhaust function]

2, температурний діапазон: RT to 300 LR-B007 Тестер сольового спрею з сенсорним екраном

3, the temperature precision: ±00.5 ℃

3. Temperature controller: PLC touch screen
4. Temperature control: PLC touch screen

5, heater: electric heat pipe heating

6. Working mode: electric heating.Heating method: electric heating.

7, the heating time: normal temperature to 160 ℃ about 15 хв

8. Chronometer: PLC display, 0.01S ~ 999min ~ 999hr (регульований)
9. One layer of hot pressing plate: 350 350мм (specially treated high hardness steel plate) electric heating.

Cooling device: tap water cooling [необов'язковий]

10. Exhaust function: low pressure automatic exhaust can be adjusted 3 LR-B007 Тестер сольового спрею з сенсорним екраном 10 times per minute

11, hydraulic system: proportional hydraulic flow closed loop control system, GPY oil pump (Japanese) drive high performance electric hydraulic with high precision of the resistance of cylinder piston implementation such as speed control mode (travel height can be set in a single freedom) with automatic pressure compensation function, pressure time can be preset, load power, steady lifting, automatic pressure, тиск, pressure relief

12. Cylinder stroke: Max 300mm
13. Oil cylinder speed: 11mm/s
14. Pressure table: 0 ~ 200kg/sq.cm
15. Обсяг :(W ×D×H)1700×750× 1460 мм
16. Electric source: 3 metrics, AC380V, 15LR-B007 Тестер сольового спрею з сенсорним екраном
17. Вага: about 430kg