- Açıklama
- soruşturma
LS-101-1 Melt Flow Index Tester
Discription:
ABS için eriyik akış hızı test cihazı kullanılabilir, polistiren, polietilen, polipropilen, poliamid, fiber reçine, akrilat, POM, flor plastik, polikarbonat ve diğer plastik malzemeler, eriyik akış hızı (MFR) veya eriyik hacim akış hızı (MVR) belirlenecek.
Standart:
GB / T3682-2018, ISO1133-2011, ASTM D1238
LS-101-1 Melt Flow Index Tester
Product Character:
1.English LCD Touched Screen.Ø
2.Hand automatic cutting material.
3.Çift sıcaklık kontrol sistemi, sıcaklık kontrol hassasiyeti daha doğrudur, higher heating efficienc
4.Double imported sensors, yukarıdan aşağıya doğru daha doğru sıcaklık gradyanı, can be used independently, and improve the service life.
- Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
Test Methods:MFR Methods
Display Mode:English color touch screen display
LS-101-1 Melt Flow Index Tester
Şartname
Modeli | LS-101-1 |
Barrel parameters | Inner hole 9.550±0.005mm |
Pistons parameters | Piston head: 9.474±0.005mm |
Outlet length | 8.000±0.025mm |
Paramters | Extrusion hole 1=2.095±0.005mm |
Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
Sıcaklık aralığı | Room Temperature~450degree centigrade |
Sıcaklık dalgalanması | ±0.2 ℃ |
Sıcaklık homojenliği | ±1°C |
Temperature display resolution | 0.1℃ |
Ekran çözünürlüğü | 0.1℃ |
Maximum comsuption | < 600W |
Time display resolution | 0.1s |
Weight parameters are as follows: | |
Weight accuracy | ±0.5% |
Temel yapılandırma
| A 0.325kg |
B 1.2kg | |
C 2.16kg | |
D 3.8kg | |
E 5kg | |
F 10kg | |
G 12.5kg | |
H 21.6kg | |
Position detection | |
Loop distance from up and down | 30mm |
Control precision | ± 0.1mm |
Test flow control | |
Times of cutting the material | 0~10 times |
Material cutting interval | 0~999s(set reference Table 2) |
Control flow reaches the set temperature without volatility | |
Barrel temperature time | 15 dakika. |
Material be installed | 1 dakika. |
Material sample temperature recovery time | 4 dakika. |
When binder set | 1dakika |
çıkış modu | Micro-automatic print output |
Cut material methods | The hand automatic cut into one body |
Test load | Eight sets of weights |
Güç | AC220V±10% 50/60HZ |
Accessories List
Hayır | İsim | Miktar | açıklama |
1 | Ağırlık | 1 Ayarlamak | 0.325㎏、0.875㎏、1.835㎏、2.5㎏、2.915㎏、3.475㎏、4.615kilogram、5.0k g |
2 | Weight tray | 1adet | Within level 1 yük |
3 | Charging hopper | 1adet | |
4 | Mouth mold cleaning rod | 1adet | |
5 | Charging bar | 1adet | |
6 | Cylinder cleaning rod | 1adet | |
7 | piston rod | 1adet | |
8 | mouth mold | 1adet | |
9 | gauze | 2rulo | |
10 | Print paper | 2 rulo |
Standard test force(8 level)
1 seviye:0.325 kg=(piston rod+weight tray+heat insulation cover+No 1 weight)
=3.187N
2 seviye:1.200 kg=(0.325+No2 0.875 ağırlık)=11.77 N
3 seviye:2.160 kg=(0.325+No3 1.835 Ağırlık)=21.18 N
4 Seviye:3.800 kg=(0.325+No4 3.475Weight)=37.26 N
5 Seviye:5.000 kg=(0.325+No.5 4.675Weight)=49.03 N
6 Seviye:10.000 kg=(0.325+No.5 4.675weight+No.6 5.000Weight)=98.07 N
7 Seviye:12.000 kg=(0.325+No.5 4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
8 seviye:21.600 kg=(0.325+No.2 0.875weight+No3. 1.835+4 numara
3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82 N
Chart 1
Melt flow rate (g/10min) | Sample quality in charging barrel (g) | Extrudate cutting-off interval time (s) |
0.1-0.5 | 3-5 | 240 |
>0.5-1 | 4-6 | 120 |
>1-3.5 | 4-6 | 60 |
>3.5-10 | 6-8 | 30 |
>10 | 6-8 | 5-15 |
1. If this experiment value is less than 0.1 g / 10 min or greater than 100 g / 10 dakika, suggest you melt flow rate
|
Chart 2
Malzeme | Test temperatureθ,℃ | Standard load mnom,kilogram |
PS | 200 | 5.00 |
PE | 190 | 2.16 |
PE | 190 | 0.325 |
PE | 190 | 21.60 |
PE | 190 | 5.00 |
PP | 230 | 2.16 |
ABS | 230 | 10.00 |
PS-1 | 200 | 5.00 |
E/VAC | 150 | 2.16 |
E/VAC | 190 | 2.16 |
E/VAC | 125 | 0.325 |
SAN | 220 | 10.00 |
ASA、ACS、AEC | 220 | 10.00 |
PC | 300 | 1.2 |
PMMA | 230 | 3.8 |
PB | 190 | 2.16 |
PB | 190 | 10.00 |
POM | 190 | 2.16 |
MABS | 220 | 10.00 |