- Açıklama
- soruşturma
BGD 264 Tam kuruma süresi test cihazı ISO 9117.1
BGD 264 tam kuruma süresi test cihazı en son ulusal GB/T standartlarına göre tasarlanmış ve üretilmiştir. 37362.1-2019 ve ISO 9117.1-2009.Used for testing whether the single coating or composite coating system of color paint, Vernik veya ilgili ürünler, standart koşullarda belirtilen kuruma süresinden sonra tamamen kuru duruma veya tamamen kuru duruma ulaşmak için gereken kuruma süresine ulaşmıştır..
Alet bir taban ve serbest kayan bir basınç sütunundan oluşur. Test boyunca, the substrate is coated with a certain thickness of color paint and varnish and dried under specified conditions.Then a certain load is applied in the test area of the coating surface, ve daha sonra yük, kaplama yüzeyinde 90゜ döndürülür., and the dryness of the entire coating is determined by checking the loss of the coating surface.
BGD 264 Tam kuruma süresi test cihazı ISO 9117.1
Ana teknik parametreler:
Pressure cylinder diameter: 25mm
Pressure cylinder assembly quality: ≤250g
Rubber disc diameter :(22±1) mm
Thickness of rubber disc :(5±0.5) mm
The hardness of rubber disc :(50±5) IRHD
Monofilament polyamide screen size: 100mm×100mm, monofilament diameter is (0.12±0.01) mm, aperture is about 0.2mm
Total load mass :(1500±10) g
ilgili ürünler
- Daha fazla okuHızlı Görünüm
LS-618 Minimum Film Forming Temperature Tester ISO 2115 ASTM D2354
- Daha fazla okuHızlı Görünüm
BGD 264 tam kuruma süresi test cihazı
- Daha fazla okuHızlı Görünüm
LS-625 Intelligent Line Drying Time Recorder
- Daha fazla okuHızlı Görünüm
Minimum Film Oluşturma Sıcaklığı(MFFT)Test Cihazı
- Daha fazla okuHızlı Görünüm
LS-625 Intelligent Line Drying Time Recorder
- Daha fazla okuHızlı Görünüm
LS-641 Line Drying Time Recorder
- Daha fazla okuHızlı Görünüm
LS-641 Line Drying Time Recorder ASTM D 5895-03, ISO 9117-4
- Daha fazla okuHızlı Görünüm
Minimum Film Oluşturma Sıcaklığı(MFFT)Test Cihazı