- คำอธิบาย
- สอบถาม
LS-112 เครื่องทดสอบการขัดถู DIN
ใบสมัคร
DIN Rubber Wear Abrasion Tester is used to test the friction of surface by a particular piece of abrasive paper, After wear for a certain time, and then assess the condition of material surface, น้ำหนัก, volume and thickness, from this standard to assess the abrasive nature of materials, as such elastic material, ยาง, tires, convey belt, transmit belt, sole, synthetic leather, leather and others
LS-112 เครื่องทดสอบการขัดถู DIN
หลักการ
Under a predetermined contact pressure and a given area ,the specimen with sandpaper angled to measureabrasion resistance of the specimen subjected to rubbing on a certain level of sandpaper, sandpaper affixed to the surface of the drum, samples pressed on a drum with sandpaper, and the specimen along the roller to the lateral movement, abrasion resistance is produced at one end of the cylindrical specimen, tests the value of the mass loss of the specimen, by the density of the specimen to calculate the amount of volume abrasion.
DIN ISO 4649:2006-11 (จ). Rubber, vulcanized or thermoplastic – Determination of abrasion resistance using a rotating cylindrical drum device.
ASTM D5963 – 04(2010)e1 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader).
LS-112 เครื่องทดสอบการขัดถู DIN
ข้อมูลจำเพาะ
Design Standards | DIN-53516,ISO-4649,GB/T9867 |
Specimen size | diameter 16mm, ความสูง 6-16 มม |
โหลด | 2.5นู๋,5นู๋,10นู๋ |
Rotating wheel | diameter 150mm, length 460mm, rotating speed 40rpm |
Roller rotation speed | 40รอบต่อนาที |
Remove range | 4.2mm/R.P.M. |
ความเร็ว | 19.2m/minute |
เครื่องประดับ | Sand paper,standard glue,sample cutter. |
น้ำหนัก | 40กิโลกรัม |
Dimention | 85×32×40cm |
อำนาจ | 1Ø, AC 220V, 50 ~60Hz 3A |