- คำอธิบาย
- สอบถาม
LS-101-3 Fully Automatic Melt Flow Index Tester
1.การแนะนำสินค้า:
This tester for high precision automatic melt flow rate instrument, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (บน), สไตรีน (ปล), โพลีโพรพีลีน (พี. พี), ABS resin, polyformaldehyde (ปอม), polycarbonate (พีซี) resin with lower melting temperature, such as plastic test, widely used in plastic production,ผลิตภัณฑ์พลาสติก, petrochemical and other industries and related institutions, scientific research units and commodity inspection departments.
2.มาตรฐานการทดสอบ:
GB/T3682-2018 | Measurement of melt flow rate and melt volume flow rate of thermoplastic plastics |
ISO 1133:2011 | Determination of mass flow rate MFR and melt volume flow rate MVR of thermoplastic melt |
ASTM D1238-13 | Standard test method for flow rate determination of thermoplastic melt by extruded plasticimeter |
LS-101-3 Fully Automatic Melt Flow Index Tester
3.Product advantage:
- Ø more paragraphs (2) temperature control method, two groups of platinum resistance sensor, two heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable
- Ø resolution temperature was 0.1 ℃, the temperature uniformity of 0.2 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 ชั่วโมง, the displacement sensor resolution is 0.001 มม.
- Thermal protection device
- Ø hand automatic cutting material, can be arbitrary set blanking time (0 ~ 999), blanking times (0 ~ 999)
- Ø test can choose quality standard, or volume method, two test methods or simultaneously, and can melt density is calculated.Both methods are tested when the piston rod moves to a certain position.
- Ø stable internal temperature alarm prompts, and an increase of 240 วินาที (GB3682 regulations) material preheat second countdown, after the end of the countdown, issued a prompt, can also set the American standard (ASTHMA) preheating time, ฯลฯ.
- Ø built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results
- Built – in mini printer for easy printing test data
- Ø high precision touch screen controller, 7 inch touch screen, can be stored and print test conditions and data recently, test print menu Settings include test time (the default) ระบบ, operating personnel, material name, test method, test conditions (อุณหภูมิ, weight weight, blanking interval) data, ผลการทดสอบ, ผลการทดสอบ, the artificial judgement OK or NG, เป็นต้น,
- Ø reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,
- Ø need weight load, are installed in screen equipment to choose corresponding weight and loading that no user manual loading or bolt type selection, reduce the workload.Test completion self – rising.
วิธีการทดสอบ:MFR +MVR Methods
โหมดการแสดงผล:หน้าจอสัมผัสสีภาษาอังกฤษ
- Technical Speicification
รุ่น | LS-101-3 |
พารามิเตอร์ Barrel | Inner hole 9.550±0.005mm length 163mm |
Pistons head parameters | หัวลูกสูบ: 9.474± 0.005 มม |
Piston rod diameter | 8.94มม |
Mold length | 8.000± 0.025 มม |
Mold nominal inner diameter | 2.0955±0.0051mm
|
Half die length | 4.000± 0.025 มม |
Half die nominal inner diameter | 1.050± 0.005 มม |
พารามิเตอร์อุณหภูมิ | ด้วยเครื่องมือควบคุมอุณหภูมิอัจฉริยะ, ด้วยการควบคุมการตั้งอุณหภูมิที่สำคัญสี่คู่, สามารถตั้งค่าพารามิเตอร์ PID ได้โดยอัตโนมัติ, ความแม่นยำสูงถึง± 0.1 องศาเซนติเกรด |
ช่วงอุณหภูมิ | Room Temperature~500degree centigrade |
ความผันผวนของอุณหภูมิ | ± 0.2 & # 8451; |
ความสม่ำเสมอของอุณหภูมิ | ± 1 ℃ |
ความละเอียดการแสดงอุณหภูมิ | 0.1℃ |
ความละเอียดการแสดงผล | 0.1℃ |
comsuption สูงสุด | < 600ว |
ความละเอียดในการแสดงเวลา | 0.1s |
พารามิเตอร์น้ำหนักมีดังนี้: | |
ความแม่นยำของน้ำหนัก | ± 0.5% |
การกำหนดค่าพื้นฐาน
| น้ำหนัก 0.325 กก |
B 1.2 กก | |
C 2.16 กก | |
D 3.8 กก | |
และ 5kg | |
F 10 กก | |
G 12.5 กก | |
สูง 21.6 กก | |
การตรวจจับตำแหน่ง | |
ระยะลูปจากขึ้นและลง | 30มม |
ควบคุมความแม่นยำ | ± 0.1 มม |
ทดสอบการควบคุมการไหล | |
ครั้งในการตัดวัสดุ | 0~ 10 ครั้ง |
ช่วงการตัดวัสดุ | 0~ 999 วินาที(กำหนดตารางอ้างอิง 2) |
การไหลของการควบคุมถึงอุณหภูมิที่ตั้งไว้โดยไม่มีความผันผวน | |
เวลาอุณหภูมิบาร์เรล | 15 นาที. |
ติดตั้งวัสดุ | 1 นาที. |
เวลาในการกู้คืนอุณหภูมิของตัวอย่างวัสดุ | 4 นาที. |
เมื่อชุดสารยึดเกาะ | 1นาที |
โหมดเอาต์พุต | เอาต์พุตการพิมพ์อัตโนมัติขนาดเล็ก |
วิธีการตัดวัสดุ | มืออัตโนมัติตัดเป็นร่างกายเดียว |
โหลดทดสอบ | น้ำหนักแปดชุด |
อำนาจ | AC220V ± 10% 50/60 เฮิร์ต |
LS-101-3 Fully Automatic Melt Flow Index Tester
5.ปarts list
ไม่ | ชื่อ | หน่วย | จำนวน | ข้อสังเกต |
1 | เครื่องโฮสต์ | ชุด | 1 | Include printer |
2 | น้ำหนัก | ชุด | Total 8 ระดับ,0.325 กิโลกรัม,1.200 กิโลกรัม,2.160 กิโลกรัม,3.800 กิโลกรัม,5.000 กิโลกรัม,10.000 กิโลกรัม,12.000 กิโลกรัม,21.600 กิโลกรัม | (1# within level 1) |
3 | ถาดน้ำหนัก | ชิ้น | 1 | within level 1 |
4 | ก้านลูกสูบ | ชิ้น | 1 | within level 1 |
5 | mouth model | ชิ้น | 1 | tungsten carbide |
6 | charging hopper | ชิ้น | 1 | สแตนเลส |
7 | loading rod | ชิ้น | 1 | |
8 | Barrel cleaning lever | ชิ้น | 1 | |
9 | Mouth die Cleaning rod | ชิ้น | 1 | สแตนเลส |
10 | Gauze | ชิ้น | 2 | |
11 | พิมพ์กระดาษ | ชิ้น | 2 | |
12 | อื่น ๆ | Certificate of quality, สเปค, one feeding plate |
- ซอฟต์แวร์:
8.List of major accessories
ไม่ | ชื่อ | หน่วย | จำนวน | ข้อสังเกต |
1 | relay | ชุด | 3 | Taiwang yangming |
2 | Temperature sensor | ชิ้น | 2 | UK RS PT100 |
3 | Power switch | ชิ้น | 1 | Zhejiang hongbo |
4 | Heating | ชิ้น | 2 | High temperature resistant pure copper heating sleeve |
5 | คอนโทรลเลอร์ (including touch screen) | ชิ้น | 1 | Self-developed intelligent multi-point temperature control system (including 7-inch touch screen) |
6 | lifting motor | ชุด | 1 | AC AC motor, plowway, Taiwan |
7 | cutting off motor
| ชุด | 1 | Taiwan imports plowway direct current |
8 | transformer | ชุด | 1 | Guangzhou baiyun |
9 | encoder | ชิ้น | 1 | Original Japanese omron |
6 | Mouth die | ชิ้น | 1 | tungsten steel |
7 | charging barrel | ชิ้น | 1 | Nitriding treatment of harwood alloy, ความต้านทานการกัดกร่อน |
8 | เครื่องพิมพ์ | ชิ้น | 1 | Beijing weihuang |