UK RK Hand Coating Rod ASTM D 823 Проволочный стержень

Стержень для ручного покрытия UK RK ASTM D 823 Проволочный стержень

Категории: Упаковка,этикетка,Клей,Машина для испытания пластиковой пленки

Описание
Запрос

Стержень для ручного покрытия UK RK ASTM D 823 Проволочный стержень

RK Ink Inspection Roller

RK Scraping sticks provide the easiest coating method, with RK scraping sticks for accurate, repeatable surface coating on most substrates. RK wire rods are rods with grooves of different shapes wrapped around stainless steel rods with precision stainless steel wire drawing. These grooves allow precise control of wet film thickness. The coating thickness of RK wire rod with close winding is in the range of 4~120um, and the higher coating amount of 150~500um can be obtained by spiral winding rod. Wire rods are used for research, тестирование и контроль качества при обнаружении чернил, краски, viscoses and various emulsions. RK wire rod suitable substrate including paper, картон, пластиковая пленка, металлическая фольга, так далее.

Стержень для ручного покрытия UK RK ASTM D 823 Проволочный стержень

Rods are used for research, тестирование и контроль качества при обнаружении чернил, краски, клеи и различные эмульсии. Suitable substrates for RK wire rods include paper, paper jam, пластиковая пленка, металлическая фольга, так далее.

The Long bar

Модель: KHC.11.0~KHC.11.9 (Long order time for Rods No. 6, 7, 8 и 9)

Длина стержня: 37.5 см * 25.5 cm Rod Diameter: 0.9см

Short Bar

Модель: KHC.10.0~KHC.10.9 (Long ordering time for Rods No. 6, 7, 8 и 9)

Rod length: 24.5 см * 14 cm Rod diameter: 0.9см (Примечание: The diameter of No. 0 ~ No. 4 short scraper rod is 0.3cm)

Стержень для ручного покрытия UK RK ASTM D 823 Проволочный стержень

Нет.	Glue the handle color/ coating thickness(микрон)	Short bar
KHC.10.0	K Bar Short bar No. 0 Белый/4 мкм	Полная длина:245мм Width of coating:140мм Диаметр:3мм
KHC.10.1	K Bar Short bar No. 1 Желтый/6 мкм
KHC.10.2	K Bar Short bar No. 2 Красный/12 мкм
KHC.10.3	K Bar Short bar No. 3 Зеленый/24 мкм
KHC.10.4	K Bar Short bar No. 4 Черный/40 мкм
KHC.10.5	K Bar Short bar No. 5 Рог/50 микрон	Полная длина:245мм Width of coating:140мм Диаметр:9мм
KHC.10.6	KBar Short bar No. 6 Оранжевый/60 мкм
KHC.10.7	K Bar Short bar No. 7 Коричневый/80 мкм
KHC.10.8	K Bar Short bar No. 8 Синий/100 мкм
KHC.10.9	K Bar Short bar No. 9 Резервуар/125 микрон

Total length of short rod: 24.50см, coating width: 14см; 0~4# diameter: 0.3см,5~9# diameter: 0.9см.

Нет.	Glue the handle color/ coating thickness(микрон)	Short bar
KHC.11.0	K Bar Short bar No. 0 Белый/4 мкм	Полная длина:375мм Width of coating:255мм Диаметр:3мм
KHC.11.1	K Bar Short bar No. 1 Желтый/6 мкм
KHC.11.2	K Bar Short bar No. 2 Красный/12 мкм
KHC.11.3	K Bar Short bar No. 3 Зеленый/24 мкм
KHC.11.4	K Bar Short bar No. 4 Черный/40 мкм
KHC.11.5	K Bar Short bar No. 5 Рог/50 микрон	Полная длина:375мм Width of coating:255мм Диаметр:9мм
KHC.11.6	KBar Short bar No. 6 Оранжевый/60 мкм
KHC.11.7	K Bar Short bar No. 7 Коричневый/80 мкм
KHC.11.8	K Bar Short bar No. 8 Синий/100 мкм
KHC.11.9	K Bar Short bar No. 9 Резервуар/125 микрон

Total length of long rod: 37.50см, coating width: 25.5см, диаметр: 0.9см

The thickness of the wet film for ASTMD823-53&BS3900 coating can range from 4 к 500 микроны. Equipped with stainless steel ink wire rod with special printing bed, with good reproducibility ink wire rod number, and color marking.

Detailed operation of RK rod:

1. First prepare the appropriate size of the base material for proofing. RK can provide two kinds of proofing paper for proofing (500 sheets in one package, half of the proofing paper is glossy paint, the other half is non-glossy paint)

For small press bed, size 12×21cm

For large press bed, size 18×31cm

2, put the base material on the press bed, clamp it.

3, select the appropriate type of ink wire rod (please see the relevant information), placed on the press bed, near the clip.

4, the paint or varnish for proofing is placed near the clip, about 1cm below the ink wire rod. (the amount please master)

5, with both hands to hold the ink wire rod at both ends, at a constant speed and pressure to the ink wire rod to the operator’s own direction, please pay attention to the operation process do not rotate the ink wire rod.

6, after proofing, put the ink silk stick into the appropriate solvent inside cleaning, dry with cloth. Please note that the ink wire should always be kept in dry state