Тестовый комплект IEC61032 11 нет суставного тестового пальца

IP40 test set D test probe Тестовый набор IP40 Тестовый щуп D
0.5J spring impact hammer 0.5J-пружинный ударный молоток
6
62
63
60
6
62
63
60

Тестовый комплект IEC61032 11 нет суставного тестового пальца

Категории: , Теги:

  • Описание
  • Запрос

Тестовый комплект IEC61032 11 нет суставного тестового пальца

IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device

Обзор продукта
Comply with IEC61032 Figure 7 тест 11, GB/T16842 Figure 7 тест 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing.
Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test.

IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device
технические параметры:

Direct diameter12 мм
Direct length80мм
Baffle diameter50мм
Baffle length100мм

IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device
How to use:
1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter.

2. В требованиях испытаний по предотвращению доступа к опасным частям, thrust test directly refers to the need to apply thrust.

Обзор продукта
Comply with IEC61032 Figure 7 тест 11, GB/T16842 Figure 7 тест 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing.
Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test.

How to use:
1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter.

2. В требованиях испытаний по предотвращению доступа к опасным частям, thrust test directly refers to the need to apply thrust.
​​​​​
IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Product overview Comply with IEC61032 Figure 7 test 11, GB/T16842 Figure 7 тест 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing. Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Technical parameters: Direct diameter 12 mm Direct length 80mm Baffle diameter 50mm Baffle length 100mm IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device How to use: 1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter. 2. В требованиях испытаний по предотвращению доступа к опасным частям, thrust test directly refers to the need to apply thrust. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Product overview Comply with IEC61032 Figure 7 test 11, GB/T16842 Figure 7 тест 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing. Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Technical parameters: Direct diameter 12 mm Direct length 80mm Baffle diameter 50mm Baffle length 100mm IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device How to use: 1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter. 2. В требованиях испытаний по предотвращению доступа к опасным частям, thrust test directly refers to the need to apply thrust. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Product overview Comply with IEC61032 Figure 7 test 11, GB/T16842 Figure 7 тест 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing. Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Technical parameters: Direct diameter 12 mm Direct length 80mm Baffle diameter 50mm Baffle length 100mm IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device How to use: 1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter. 2. В требованиях испытаний по предотвращению доступа к опасным частям, thrust test directly refers to the need to apply thrust. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Product overview Comply with IEC61032 Figure 7 test 11, GB/T16842 Figure 7 тест 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing. Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Technical parameters: Direct diameter 12 mm Direct length 80mm Baffle diameter 50mm Baffle length 100mm IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device How to use: 1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter. 2. В требованиях испытаний по предотвращению доступа к опасным частям, thrust test directly refers to the need to apply thrust. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Product overview Comply with IEC61032 Figure 7 test 11, GB/T16842 Figure 7 тест 11, IEC60884, IEC60598, IEC60335, IEC60065, GB8898, GB7000, GB4706 and GB2099 standard requirements. It is used to test parts that are protected from human contact. It can also be used to test the mechanical strength of holes in the housing or the internal baffle of the housing. Can be customized: equipped with wiring terminals for anti-shock test, or handle end open M6 thread hole (with push tension meter used) for shell protection test. IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device Technical parameters: Direct diameter 12 mm Direct length 80mm Baffle diameter 50mm Baffle length 100mm IEC61032 Diameter 12MM Test tool 11 anti-shock test finger, no joint test finger configuration with thrust device How to use: 1, the test finger part can not touch live parts or dangerous parts, and 50mm-20mm baffle can not enter. 2. В требованиях испытаний по предотвращению доступа к опасным частям, thrust test directly refers to the need to apply thrust.​

Свяжитесь с нами





сопутствующие товары