Tester inițial de adeziv în utilizarea procesului pentru a face o treabă bună de întreținere, doar o întreținere bună poate prelungi durata de viață, să ne uităm la întreținerea testerului inițial de adeziv:
Întreținere pe timp scurt:
1, pentru a verifica regulat dacă orificiul de ventilație al testerului inițial de aderență este blocat, and clean up the dust.
- Check whether the current and voltage of the equipment are normal and whether the line is aging.
- Verificați dacă testerul inițial de aderență funcționează normal.
- Clean the dust in the inner cavity of the equipment.
Long maintenance:
- Check whether the circuit and switch are normal.
- Check whether all power supplies of the equipment are normal.
- The transformer insulation of the initial adhesion tester is not less than 5 megohm. If it cannot be reached, the transformer must be re-dried.
4, the adjustable mechanical parts of the full range of adjustment, the number of not less than 3 ± 0,2GU ± 0,5GU ± 0,5%GU.
- Calibrate the accuracy of the equipment once every 2 times of maintenance.
The above is about the maintenance method of the initial adhesion tester, I hope we should do a good job in maintenance of the related work.