- Descriere
- Anchetă
Viscozimetru cu ecran tactil
Caracteristici principale:
- Using ARM technology, built in Linux system. The operation interface is simple and clear, through the test program to create and dataAnalysis, rapid and easy to carry out the viscosity test;
- The viscosity measurement is accurate, each range is automatically calibrated with the computer, the accuracy is high, and the error is small;
- The display rich content: in addition to the viscosity, si temperatura, shear rate, shear stress, measurement for the full-scale value percentage (graphics), automatic scanning, overflow alarm range, the maximum measurement range, the rotor speed under the combination of the date, time and so on. And it can show the kinematic viscosity in the case of known density, great to meet different measurement requirements of users;
- Function is complete, can be measured regularly, 30 sets of test procedures, access to the 30 HG268 Contor de luciu unghi TRI, real-time display of viscosity curve, print data and curves, etc.;
- Pre – level meter, the level of direct and convenient adjustment
- Optional temperature probe, viscometer special constant temperature bath, constant temperature cup, printer, standard samples (standard oil viscosity) etc.;Widely used in all kinds of fluid need to measure viscosity. Including paint, a picta, cerneală, produse cosmetice, paper pulp, alimente, oil, starch, solvent based adhesive, latex, biochemical products and so on.Detailed technical parameters:
Model LVDV-1T Control / display mode 5 ecran tactil color inch speed(r/min) 0.3,0.6,1.5,3,6,12,30,60 0.5,1,2,2.5,4,5,10,20,50,100
measuring range mPa.s 0.6~ 2,000,000(0 ~ 4# rotor) 10~200,000(21/27/28/29# rotor)
Measurement of 10 below the ultra low viscosity to buy 0# rotor rotor 1 – 4#(standard configuration) 0#rotor (Select configuration)
21/27/28/29#rotor(Select configuration)
Measurement error (Newton liquid) ±1% Repetition error (Newton liquid) ±0. 5% Timing function standard configuration Temperatura measuring function
Standard temperature probe interface (need to select the temperature probe configuration)
Automatic scanning function Automatic scanning and recommendation of the best combination of rotor and speed
Display the maximum measurement range The range of viscosity can be measured by the combination of the selected rotor and rotational speed. Shear stress / shear rate
display Display kinematic viscozitate
Need to enter the density of the sample Establish measurement procedures Can save up to 30 groups (including the rotor, viteză, temperatura, time, etc.)
Save measurement results Can save up to 30 sets of data (including viscosity, temperatura, rotor, viteză, shear rate, shear stress, time, densitate, vâscozitatea cinematică, etc.) Viscosity time curve real-time display Print Print data, curve (standard print interface, should choose to buy a printer)
Constant temperature unit
Opțiuni (including all kinds of special thermostat thermostatic cup viscometer.)
Alimentare electrică 110V / 60Hz or 220V / 50Tensiune de intrare Outline dimension 300 × 300 × 450(mm) Opțiune:
- Ultra low viscosity adapter (0# rotor)
A set of three pieces (rotor, sample bucket,connecting frame)For the measurement of ultra low viscosity samples below 15mPa.S.
The amount of sample required for each measurement is 18-20ml ,The accuracy of measurement is 0.1mPa.S
- Adaptor eșantion mic
By 21#, 27#, 28#, 29# and the like rotor
barrel and connecting frame,
The sample size for each measurement is 18ml.
- Temperature probe (temperature sensor)
High precision temperature measurement chip
with A/D conversion in American Production
fie baterie reîncărcabilă sau alcalină: 100 – 0
Precizia măsurătorilor: 0.1
- Micro thermal printer
Can be directly connected with the viscometer
print data
Print curve
5.Viscometer special thermostatic bath
DC0506N:
Controlul temperaturii plăcii fierbinți singur: -5 la 100
Temperature control precision: 0.1
Alimentare electrică: 220V, 50Tensiune de intrare
CH1006N:
Controlul temperaturii plăcii fierbinți singur: room temperature and 10 la 100
Temperature control precision: 0.1
The circular opening can be placed 200ml beaker and direct viscosity
The external circulation function can also be controlled by the constant temperature liquid lead
To the outside of the constant temperature cup, to meet different test requirements