LS-506-1 Stiffness Tester

LS-506-1 Stiffness Tester

HG268 Contor de luciu unghi TRI

Digital display (touch screen) crease stiffness tester, is suitable for testing all kinds of paper and paperboard and all kinds of new materials bending crease stiffness test instrument.The stiffness instrument is suitable for testing flexural crease stiffness of paper, paperboard and other sheet materials with thickness less than 3mm, and also for testing softness of wire, leather and film.

LS-506-1 Stiffness Tester

Test Standard

Măsurarea modelului de bază poate îndeplini cerințele de bază de testare a luciului 23144 “general principles for the determination of static bending stiffness of paper and paperboard”;

Măsurarea modelului de bază poate îndeplini cerințele de bază de testare a luciului 22364 “determination of bending stiffness of paper and paperboard”;

ISO 5628 “paper and board – determination of static bending stiffness – general principles”;

ISO 2493 paper and board – determination of flexural stiffness

LS-506-1 Stiffness Tester

Specificație

Easy operation via the integrated touch screen

fie baterie reîncărcabilă sau alcalină:0-30000mN

Load cell accuracy:±0,1%

Marime de mostra:38*70mm Standard size

Measure thickness:0.01-5mm

Rezoluţie:0.01mN

Bend angle:1-92° adjustable

Multi-angle measurement: the word test can measure 3 different angles at the same time,1° -90° can set

Angle speed control:0.5-5°/sec Three test angles and duration are independently adjustable

Angle accuracy:±0.1°

Bend length:Choose different force arms according to different materials

8 grade force arms choose:length span:1-60mm,5mm,10mm,15mm,20mm,25mm,30mm,40mm,50mm,8 grade adjustable.

Length span accuracy:±0.1mm

Bend time:5-35s adjustable

Self-calibrate:The equipment can realize self-calibration and standard calibration tools

Data ouput:7 inch touched screen,with test curve

Print output：Thermal paper printer

Test fixture: manual fixture operation, visual menu operation

Clamping mode: unlimited clamping, non – destructive continuous clamping

Signal output: the device can achieve self-calibration: standard calibration tools

Sample cutter Specification:

Marime de mostra: bending stiffness (70×38)mm crease stiffness :(38×36)mm

Parallelism of two long sides: ≤0.015mm

Sampling thickness :(0.1~1.2)mm

Dimensiunea totală: About300×90×90mm

Greutate: 13 kg