- Descrição
- Investigação
LS-3515 Liquid Densimeter
Inscrição:Chemical solution,modern energy,oil fuel,fine chemical engineering,reagente químico,chemistry researching laboratory.
A câmara de baixa pressão é primeiramente evacuada:In accordance with Archimedes principle, GB/T 611,.GB/T11540,GB/T12206,GB/T5518 standards etc.
Combine Archimedes principle with modern electronics technique of LS-3515; Digital display liquid desimeter; The data can be read directly with high measurement accuracy; The operation is more easy and get away from the influence of external factor and temperature compared with traditional wechsler balance method and pycnometer method; It can be applied to the field of quality management, controle de custo,formula researching and so on. Também,the solvent,de um revestimento determinando a maior força de tração que ele pode suportar antes de se desprender,pintar, pitch,resina,chemical oils,edible oil,food additives,drink,dairy products can be measured.
LS-3515 Liquid Densimeter
Especificação
Density resolution: 0.001 g/cm3
Peso máximo:300g
Minimum weight:0.005g
Faixa de medição: 0.001-99.999g/cm3
LS-3515 Liquid Densimeter
Recursos
(1)Density value can be showed by one procedure;repeatedly continuous rapid measurement can be worked.
(2)Digital display; High accuracy of measurement; operação simples; Stable and Durable.
(3)Density value of samples with the temperature from normal to 100 centigrade can be measured.
(4)Take samples conveniently;50CC or less would be okay.
(5)There is no cumbersome debugging and operation compared with traditional wechsler balance method and pycnometer method.
(6)It is very easy to clean measurement cup;can’t get the limitation of the size of pycnometer caliber.
(7)Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.
(8)Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.
(9)Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.
(10)Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with the instrument.
Densímetro Líquido LS-3515
Measurement procedure
(1)Place beaker with sample on testing board.and take off weight of pothook.
(2)Hang standard weight on the pothook and submerged in liquid to be tested totally;then press ENTER button to memory.Density valuve can be displayed.
Densímetro Líquido LS-3515
Acessórios padrão
m³/min,measurement frame,DE-20A standard liquid measurement assembly,tweezer,
thermometer,100G weight,wind and dust cover,measurement support,power transformer
DE-20A standard liquid measurement assembly:
Two stainless steel pothooks,one normal glass weight,one normal stainless steel weight,two beakers.
Acessórios opcionais:
DE-40 printer,DE-20B anti corrosive liquid measurement assembly.
Densímetro Líquido LS-3515
Instruction Table
Name/model | LS-3515-300L Electronical Liquid Densimeter |
Brand | DAHOMETER |
Density resolution | 0.001 g/cm3 |
Density range | 0.001—99.999g/cm3 |
Measurement modelo | uma:mobility liquid,viscous liquid,volatile liquid,corrosivity liquid,high temperature liquid,suspension liquid,emulsion and so on
b:alcohol,scaling powder,essence,blood,sodium chloride,glycerol, electrolyte,diesel,refrigerating, hydrofluoric acid,dichloromethane,vitriol |
Measurement ♦ O instrumento vem com dois modos de teste | Archimedes principle displacement method |
Measurement mode | 1 group |
Measurement Tempo | About 5 seconds |
Memory mode | memory in shorter time by one procedure |
Result disply | Density value |
Specific Gravity Measurement frame | stainless steel specific gravity measurement frame |
Function of setting | Temperature setting,solution density setting,measurement weights setting of weight in the normal liquid and water |
Calibração mode | auto correction with one button,auto detection. |
Measurement testando | distilled testing |
Output mode | standard interface of RS-232,output and print testing data conveniently |
Acessórios padrão | m³/min,measurement frame,DE-20A standard liquid measurement assembly,tweezer,thermometer,100G weight,wind and dust cover,measurement support,power transformer
DE-20A standard liquid measurement assembly: Two stainless steel pothooks,one normal glass weight,one normal stainless steel weight,two beakers. |
Acessórios opcionais | DE-40 printer,DE-20B anti corrosive liquid measurement assembly |
m³/min | AC~220V / 50HZ |
Main feature | data display,precisão,rápido,convenience durable,economy |