IEC 60061 7006-27b-1 Lamp Holder Gauge Go Gauge

IEC 60061 7006-27b-1 Lamp Holder Gauge Go Gauge

  • Description
  • Inquiry

IEC 60061 7006-27b-1 Lamp Holder Gauge Go Gauge

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
E27 Lamp holder gauge name
Meet the standard: IEC 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1
E27 Lamp holder Solder Height Gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (anti-electric shock) 7006-51A-2

ReferenceDimension(mm)Tolerance(mm)Limit after wear(mm)
d26.45+0.03/-026.50
d124.26+0.03/-024.31
L16.5±0.1
O28±0.2
P3.629
r1.025
T22.0+0.0/-0.03
V15±0.1
W5±0.1

​The shape part of the edge of the thread shall be broken with radius of 0.2mm to 0.3mm.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
Purpose:

To check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
Testing

When the cap on a finished lamp has been screwed into the gauge as far as it will go, the center contact shall be co-planar with, or project beyond, surface X.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
E27 Lamp holder gauge name
Meet the standard: IEC 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1
E27 Lamp holder Solder Height Gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (anti-electric shock) 7006-51A-2

ReferenceDimension(mm)Tolerance(mm)Limit after wear(mm)
d26.45+0.03/-026.50
d124.26+0.03/-024.31
L16.5±0.1
O28±0.2
P3.629
r1.025
T22.0+0.0/-0.03
V15±0.1
W5±0.1

​The shape part of the edge of the thread shall be broken with radius of 0.2mm to 0.3mm.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
Purpose:

To check the maximum dimensions of the screw thread and dimension T1 minimum of caps on finished lamps.

IEC 60061 7006-27B-1 Lamp holder gauge go gauge
Testing

When the cap on a finished lamp has been screwed into the gauge as far as it will go, the center contact shall be co-planar with, or project beyond, surface X.

   

 

Contact Us