LS-3515 Liquid Densimeter

LS-3515   Liquid Densimeter

Application:Chemical solution,modern energy,oil fuel,fine chemical engineering,chemical reagent,chemistry researching laboratory.

Standards:In accordance with Archimedes principle, GB/T 611,.GB/T11540,GB/T12206,GB/T5518 standards etc.

Combine Archimedes principle with modern electronics technique of LS-3515; Digital display liquid desimeter; The data can be read directly with high measurement accuracy; The operation is more easy and get away from the influence of external factor and temperature compared with traditional wechsler balance method and pycnometer method; It can be applied to the field of quality management, cost control,formula researching and so on. Also,the solvent,adhesive,paint, pitch,resin,chemical oils,edible oil,food additives,drink,dairy products can be measured.

LS-3515 Liquid Densimeter

Specification

Density resolution: 0.001 g/cm3

Maximum weight:300g

Minimum weight:0.005g

Measuring range: 0.001-99.999g/cm3

LS-3515 Liquid Densimeter

Features 

(1)Density value can be showed by one procedure;repeatedly continuous rapid measurement can be worked.

(2)Digital display; High accuracy of measurement; Simple operation; Stable and Durable.

(3)Density value of samples with the temperature from normal to 100 centigrade can be measured.

(4)Take samples conveniently;50CC or less would be okay.

(5)There is no cumbersome debugging and operation compared with traditional wechsler balance method and pycnometer method.

(6)It is very easy to clean measurement cup;can’t get the limitation of the size of pycnometer caliber.

(7)Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.

(8)Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.

(9)Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.

(10)Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with the instrument.

LS-3515  Liquid Densimeter

Measurement procedure

(1)Place beaker with sample on testing board.and take off weight of pothook.

(2)Hang standard weight on the pothook and submerged in liquid to be tested totally;then press ENTER button to memory.Density valuve can be displayed.

LS-3515  Liquid Densimeter

Standard accessories

Host,measurement frame,DE-20A standard liquid measurement assembly,tweezer,

thermometer,100G weight,wind and dust cover,measurement support,power transformer

DE-20A standard liquid measurement assembly:

Two stainless steel pothooks,one normal glass weight,one normal stainless steel weight,two beakers.

Optional accessories:

DE-40 printer,DE-20B anti corrosive liquid measurement assembly.

LS-3515  Liquid Densimeter

Instruction Table