- Omschrijving
- Onderzoek
LS-201-3 Programmable Temperature Humidity Climatic Chamber
Ontwerpstandaard:
GB11158 | Technische staat van de testkamer op hoge temperatuur |
GB10589-89 | Technische staat van de testkamer bij lage temperatuur |
GB10592-89 | Technische staat van de testkamer voor hoge en lage temperaturen |
GB/T10586-89 | Vochtige hittetestkamer Technische staat |
GB/T2423.1-2001 | Testmethoden voor lage temperaturen in de testkamer |
GB/T2423.2-2001 | Testmethoden voor hoge temperaturen in de testkamer |
GB/T2423.3-93 | Testmethoden voor vochtige hittetestkamers |
GB/T2423.4-93 | Afwisselende testmethoden voor vochtige hitte |
GB/T2423.22-2001 | Temperatuur veranderende testmethoden |
IEC60068-2-1.1990 | Testmethoden voor lage temperaturen in de testkamer |
IEC60068-2-2.1974 | Testmethoden voor hoge temperaturen in de testkamer |
GJB150.3 | Testmethoden bij hoge temperaturen |
GJB150.4 | Testmethoden bij lage temperaturen |
GJB150.9 | Testmethoden voor vochtige hitte |
60068-2-1
LS-201-3 Programmable Temperature Humidity Climatic Chamber
Uses:
This equipment can simulate different environment condition. It’s appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.
LS-201-3 Programmable Temperature Humidity Climatic Chamber
Specificatie
Model | LS-201-3-80 (A~F) | LS-201-3-150L (A~F) | LS-201-3-225L (A~F) | LS-201-3-408L (A~F) | LS-201-3-800L (A~F) | LS-201-3-1000L (A~F) |
Inner size: WHD(cm) | 40*50*40 | 50*60*50 | 60*75*50 | 60*85*80 | 100*100*80 | 100*100*100 |
External size: WHD(cm) | 105*165*98 | 105*175*108 | 115*190*108 | 135*200*115 | 155*215*135 | 155*215*155 |
Temperatuurbereik | (Low temp.:EEN:+25℃; B.:0℃;C:-20℃; D:-40℃; E.:-60℃; F.:-70℃) (High temp.: + 150℃) | |||||
Vochtigheidsbereik | 20%~98% R.H | |||||
Temp analytic accuracy/ uniformiteit | 0.1℃/±2.0℃ | |||||
Temperature Fluctuation | ±0,5℃ | |||||
Humidity control accuracy | ±0.1%;±2.5% | |||||
Heat, cooling time | Heat up about 4.0°C/min ; Cooling about 1.0°C/min | |||||
Inner and outer materials | SUS#304 Stainless steel for inner chamber ; Carton Advanced cold plate nano paint for outer | |||||
Insulation materials | Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials | |||||
Cooling system | Air cooling/single segment compressor(-40° C) ,air and water double segment compressor (-50°C~-70°C) | |||||
Protection devices | Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch, super humidity over-temperature protection switch, fuse, failure warning system | |||||
Parts | Watching window , 50mm testing hole , PL internal bulbs , Wet and dry bulb gauze , partition plate , castorx4, Foot Cupx4 | |||||
Compressor | Original France“Tecumseh”brand | |||||
Controller | Taiwan, Independent R&D software | |||||
Kracht | AC220V 50/60Hz & 1 , AC380V 50/60Hz 3 | |||||
Gewicht (kg) | 170 | 220 | 270 | 320 | 450 | 580 |