E26 7006-29-3 Neem contact op met prestatiemeter

Categorieën: Kleine meters, Testvinger en veerslaghamer Labels: E26 7006-29-3 Neem contact op met prestatiemeter

Omschrijving
Onderzoek

E26 7006-29-3 Neem contact op met prestatiemeter

IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
E26/E26d lamp cap gauge

Product name :E26 lamp holder gauge Technical standard :NL 1483/ IEC 60061-3

E26 Lamp cap gauge Classification:

IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge

Serial number	Gauge type	Gauge name	Standard drawing number
1	E26	Lamp cap pass gauge	7006-29L-4
2	E26	Lamp cap contact performance gauge (US gauge)	7006-29-3
3	E26	Lamp cap contact performance gauge (Day gauge)	7006-29-3
4	E26	Lamp holder Anti-accidental contact gauge (anti-elektrische schok)	7006-29A-2

The value is for lamps fitted with E26/24 caps. For lamps fitted with E26/25 caps, dimension K is 29.3mm.
The value is for lamps fitted with E26/24 caps. For lamps fitted with E26/25 caps, dimension M is 25.9mm.
The gauge is shown in the test position. In the rest position the plunger shall be above plane V.
Only for E26/24

Referentie	Dimensie(mm)	Afbeeldingsvenster en tekenvenster kunnen weergave-meetelementen en annotaties synchroniseren(mm)	Referentie	Dimensie	Afbeeldingsvenster en tekenvenster kunnen weergave-meetelementen en annotaties synchroniseren
d	26.52	+0.0/-0.02	N(4)	25.4	+0.02/-0.0
H.	14.0	+0.1/-0.1	CPJ-4025W CPJ-3020W Horizontale digitale profielprojector	28.19	+0.0/-0.02
K	27.94(1)	+0.05/-0.0	Z	45	+0.1/-0.1
M.	24.43(2)	+0.05/-0.0	α	2	±30′

IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
Doel:
To check lamp dimensions for contact making in IEC holders.

IEC 60061-3 7006-29-3 American rules and Japanese rules Contact performance gauge E26 Lamp cap gauge
Testen :
The shape of the lamp with regard to the fit in the lampholder is assured to be correct. If the lamp can be pushed into the gauge till plane W reaches plane V or project beyond it.

For E26/24 capped lamps, when surfaces V and W are coincident, the top of the cap including any solder or conductive material, shall not extend above surface X.