LS-210 Three Box Thermal Shock Chamber

LS-211 Rain Test Chamber
LS-209-2 Two Box Thermal Shock Chamber
2

LS-210 Three Box Thermal Shock Chamber

카테고리:

  • 기술
  • 문의

LS-210 Three Box Thermal Shock Chamber

사용하다

Programable thermal shock chamber price is used to test the change of material under extremely high temperature and extremely low temperature environment that continue alternation in the shortest time,Testing the chemical changes or physical damage of material caused by the thermal expansion and contraction. Testing box divided two parts, one is hightemperature region, another is low-temperatureregion, the testing sample placed on the moving basket, using unique heat storage and cool storage,the cylinder taking basket moves up and down in the hot and cold region to complete the hot and cold temperature impact testing.

 

LS-210 Three Box Thermal Shock Chamber

사양

모델ㅏ

(A~D)

NS

(A~D)

씨

(A~D)

디

(A~D)

이자형

(A~D)

에프

(A~D)

내부 크기: WHD(센티미터)40*35*3050*30*4050*40*4050*50*4060*40*5060*50*50
외부 크기: WHD(센티미터)150*180*150160*175*160160*185*160160*185*170170*185*170170*195*170
온도 범위(Test Chamber)high temperature:+60℃~+200℃;low temperature -10℃~-65℃(ㅏ:-45℃;NS:-55℃;씨:-65℃)
Heating TimeRT~200℃ About 30min
Cooling TimeRT~-70℃ About 85min
Temperature Conversion TimeLess than 10S
Temperature Recovery TimeLess than 5min
Temperature Deviation±2.0℃
Temperature Fluctuation±0.5℃
재료External material: SUS#304 Stainless steel plate

Internal material:SUS#304Stainless steel plate

Output ModeWater-cooled or air-cooled,Taikang compressor in France
제어 장치TEMI South Korea
Cooling SystemWater-cooled or air-cooled,Taikang compressor in France
Protection devicesFuse switch, compressor overload switch, refrigerant high and low pressure

protection switch,super humidity over-temperature protection switch,

fuse, failure warning system

patrsWatching window;50mm testing hole; partition plat
힘AC380V 50/60Hz Three-phase four-wire ac power
무게 (킬로그램)7507908308809501050

 

LS-210 Three Box Thermal Shock Chamber

1. Profile.
1.1 안건Thermal shock test chamber (three zone)
1.2 모델LR-B010
1.3 Sample restrictions

 

 

The equipment is prohibited to do the test and storing as below:

– Flammable, explosive, volastile substances;

– Corrosive substances;

– Biological samples;

– Source of strong electromagnetic radiation.

1.4 Test conditionEnvrionmental temperature: +25℃; 습기: ≤85%, with no samples inside the chamber
1.5 테스트 방식GB/T 5170.2-1996 temperature test chamber and so on
1.6 Meet the test standardMeet GB2423, IEC68-2-14, JIS C 0025, MIL-STD-883E,

IPC 2.6.7, BELLCORE and other standards

2. 기술적인 매개변수.
내부 크기 (WxHxD)mm400×350×300mm
Inner volume42엘
외부 크기 (WxHxD)mm1550x1650x 1470mm
Preheating temperature+60℃～+200℃ (heat up +25℃～+200℃∕ 20min)
Precooling temperature-10℃ ～-45℃ (cooling +25℃～-45 ℃∕65min)
High temp. shock range+60℃～+150℃
Low temp. shock range-10℃～-40℃
온도 변동±0.5℃
Temperature deviation±2.0℃
Shock recovery time≤5min (control point)

문의하기





관련 상품