LS-657 Reflectance Meter

LS-657 Reflectance Meter

불투명

The terms “contrast ratio”, “불투명” 필름에서 발생하는 다양한 건조 및 경화 단계를 감지하기는 쉽지만 화학적, 물리적 원리로 정의하기는 어렵습니다. “숨은 힘” are used interchangeably throughout the coatings industry but on this page, in order to simplify matters, only the term opacity will be used. Opacity is defined as the ability of a coating to prevent the transmission of light. A practical example of this is the case where a yellow wall is painted using a red paint. The greater the opacity the red paint, the more efficient it will be at hiding the underlying yellow colour

Opacity is defined by how a wet film of the test coating is applied to a black and white patterned substrate. After the film has dried, a reflectance meter or a spectrophotometer is used to measure the amount of light reflected from the overcoated black areas of the substrate. This is then expressed as a percentage of the amount of light reflected from the overcoated white areas. This value is the opacity of the film.

A paint which is highly opaque will obscure the black and white areas to an equal extent. In this situation, equal amounts of light will be reflected from the overcoated black and white areas and consequently an opacity value of 100% will be obtained.

LS-657 Reflectance meter is designed and manufactured according to international standard ISO2814, ISO 3906 , ISO 6504,BS 3900 및 DIN 55984

특징：

◆ 작고 가벼운, real easy to be carried and used.

◆ Auto zero calibration.

◆ 1.5V 알카라인 배터리 1개로 거의 50 시간 및 10000 readings.

◆ 장기간 안정적인 광원 교체 불필요.

■ Measure range：0～100%

■ Measurement condition：45°/ 0

■ 반복성：1.5%

■ Power supply：One 1.5V alkaline Battery or rechargeable

■ 창 크기：12×17mm（ellipse）

■ Dimension：114mm×32mm×64mm

■ 무게： 300지