導入
ISO (国際標準化機構) 国家標準化団体の世界的な同盟です (ISO会員団体). 国際規格の開発は通常、ISO 技術委員会を通じて行われます。. 技術委員会が設立された主題に関心を持つ各加盟機関は、その委員会に代表される権利を有する。. ISO と連携する国際政府および非政府組織もこの作業に関与しています。. ISO は国際電気標準会議と緊密に連携しています。 (IEC) 電気の標準化に関するあらゆる問題について.
この文書の作成に使用される手順と、さらなるメンテナンスに使用される手順については、パートで説明されています。 1 ISO/IEC 指令の. 特に, さまざまな種類の ISO 文書に必要なさまざまな承認基準に注意を払う必要があります。. この文書は ISO/IEC 指令パートの編集規則に従って作成されています。 2 (iso.org/directives を参照してください。).
この文書の特定の要素は特許権の対象となる場合があることに注意してください。. ISO は、そのような特許の一部またはすべてを特定する責任を負いません。. 文書の作成中に特定された特許権の詳細は、序論および/または ISO が受理した特許請求の範囲のリストに記載されています。 (iso.org/patentsを参照してください。).
この文書で使用されている商号はユーザーの便宜のために提供されており、推奨を構成するものではありません。.
ISO 18768-2-2022 – Organic Coatings on aluminium and its alloys – Specification of methods for decorative and protective organic coatings on aluminium – 部 2: Liquid coatings
自主的, 関連する規格および適合性評価に関連する ISO 特有の用語の意味および関連する ISO の貿易上の技術的障壁を表現する (未定) 世界貿易機関の原則を遵守する (WTO) 情報, iso.org/iso/foreword.html を参照してください。.
この文書は ISO/TC 技術委員会によって作成されました。 79, Light Metals and their Alloys, 分科会SC 2, Organic and anodized Coatings on Aluminium.
ISO のすべての部品のリスト 18768 シリーズは ISO Web サイトで見つけることができます.
この文書に関するフィードバックや質問は、ユーザーの国内標準化団体に送信してください。. これらの機関の完全なリストは、iso.org/members.html でご覧いただけます。.
導入
There are three main surface treatments for aluminum and its alloys:
NS) anodized coating;
ループ過負荷の警告を制御します) Organic coatings;
c) A combination of anodized coating and organic coating.
ISO 18768-1 and this document provide b) performance requirements and test methods for organic coatings.
NS) Performance requirements and test methods for anodized coatings are given in ISO 7599, and c) combined anodized coatings and organic coatings are given in ISO 28340.
It is assumed that users are familiar with other relevant international and regional standards. These standards should be respected, and this document uses an optional system in this context.
ISO 18768-2-2022 – Organic Coatings on aluminium and its alloys – Specification of methods for decorative and protective organic coatings on aluminium – 部 2: Liquid coatings
1 範囲
This document specifies methods for specifying decorative and protective organic coatings on aluminum and its alloys. It defines the characteristic properties of organic liquid coatings and provides a test method with minimum performance requirements, with reference to the application and erosion of the environment in which the painted aluminum is applied.
This document applies to aluminum products with liquid coatings for general use, as well as liquid coatings processed primarily by electrostatic liquid spraying, air spraying or airless spraying.
This document does not apply to aluminum coil coatings.
2 規範的参照
次のファイルは、このドキュメントの要件の一部またはすべてを構成する方法でテキスト内で参照されています。. 日付の付いた参照については, 引用されたバージョンのみが適用されます. 日付のない参考文献については, リファレンスの新しいバージョン (改訂も含めて) 当てはまる.
ISO 1463, Metal and oxide coatings – 膜厚測定 – microscopy methods
ISO 1519, 塗料とワニス – Bending test (cylindrical mandrel)
ISO 1520, 塗料とワニス – cupping test
ISO 2106, Anodizing of aluminium and its alloys – Determination of mass per unit area (surface density) of anodized coatings – Gravimetric method
ISO 18768-2-2022 – Organic Coatings on aluminium and its alloys – Specification of methods for decorative and protective organic coatings on aluminium – 部 2: Liquid coatings
ISO 2360, Non-conductive coatings on non-magnetic conductive base metals – 膜厚測定 – amplitude sensitive eddy current method
ISO 2409, 塗料とワニス – Crosscutting testing
ISO 2812-2 塗料とワニス – 液体に対する耐性の測定 – 部 2: 水浸法
ISO 2813, 塗料とワニス – Determination of gloss values at 20°, 60° and 85°
ISO 3892, Conversion coatings on metallic materials – Determination of coating mass per unit area – Gravimetric method
ISO 4211-2, 家具 – Surface finish testing – 部 2: Assessment of resistance to moisture and heat
ISO 4211-3, 家具 – Surface finish testing – 部 3: Assessment of resistance to dry heat
ISO 4623-2, 塗料とワニス – Determination of filamentous corrosion – 部 2: Aluminium substrates
ISO 4624, 塗料とワニス – 粘着引き抜き試験
ISO 4628-2, 塗料とワニス – コーティング劣化の評価 – 欠陥の数とサイズの指定, 外観の均一な変化の強さ – 部 2: 発泡度の評価
ISO 18768-2-2022 – Organic Coatings on aluminium and its alloys – Specification of methods for decorative and protective organic coatings on aluminium – 部 2: Liquid coatings
ISO 4628-10, 塗料とワニス – コーティング劣化の評価 – 欠陥の数とサイズの指定, 外観の均一な変化の強さ – 部 10: Assessment of degree of filamentous corrosion
ISO 6270-1, 塗料とワニス – Determination of moisture resistance – 部 1: Condensation (single side exposure)
ISO 6270-2, 塗料とワニス – Determination of moisture resistance – 部 2: Condensation (exposure in cabinets with hot water tanks)
ISO 6270-3, 塗料とワニス – Determination of moisture resistance – 部 3: Condensation (exposure in cabinets with heated, bubbling tanks)
ISO 6272-2, 塗料とワニス – 急速な変形 (耐衝撃性) tests – 部 2: drop weight test, small area indenter
ISO 7784-1 塗料とワニス – Determination of wear resistance – 部 1: Method of covering wheels and rotating specimens with sandpaper
ISO 7784-2, 塗料とワニス – Determination of wear resistance – 部 2: Method of using abrasive rubber wheels and rotating specimens
ISO 8295, プラスチック – Films and sheets – Determination of coefficient of friction
ISO 8296, プラスチック – Films and sheets – Determination of wetting tension
ISO 18768-2-2022 – Organic Coatings on aluminium and its alloys – Specification of methods for decorative and protective organic coatings on aluminium – 部 2: Liquid coatings
ISO 9227, 人工大気中での腐食試験 – 塩水噴霧試験
ISO 15184, 塗料とワニス – Determination of film hardness by pencil test
ISO 17132-2007, 塗料とワニス. Tベンド試験
ISO 16474-2, 塗料とワニス – 実験室の光源への暴露方法 – 部 2: xenon arc lamps
ISO 21227-2, 塗料とワニス – Evaluation of defects on coated surfaces using optical imaging – 部 2: Evaluation procedure for multiple impact lithotriptic testing
ISO 28340:2013, Composite coatings on aluminium – General specification for combined coatings of electrophoretic organic coatings and anodized coatings on aluminium
ASTM C207, Standard specification for hydrated lime for Masonry
ASTM D968, Standard Test method for Wear Resistance of Organic Coatings through Dropped abrasives
ASTM D7869, Standard Practice for Xenon Arc Exposure Testing of Transportation Coatings, Enhanced Light and water exposure
QUALICOAT Specification 2022, Quality labeling specification for liquid and powder organic coatings on aluminum for construction applications
GSB QR AL 631-7 ST 663-7, Methods of Measurement and testing
ISO 18768-2-2022 – Organic Coatings on aluminium and its alloys – Specification of methods for decorative and protective organic coatings on aluminium – 部 2: Liquid coatings
3 用語と定義
この文書の目的のために, 次の用語と定義が適用されます.
3.1 Liquid Coating
A dry coating of a certain thickness that has decorative and protective effects on the product, the coating is formed by liquid paint and does not include coatings formed by anodizing, combination coating or powder coating
3.2 Reference Examples
Reference specimen
Define a sample of acceptable attribute criteria
ノート 1: This can be agreed between the customer and the surface treatment provider
3.3 重要な表面
The part of the article covered or to be covered by the coating, and the coating is of no further importance to the service and/or appearance
3.4 サンプル
A single sample of the final product for testing
標準情報部分のみ公開. 完全なコンテンツを表示するには, 公式チャネルを通じて標準を購入する必要があります.