Tester adesivo iniziale nell'uso del processo per fare un buon lavoro di manutenzione, solo una buona manutenzione può prolungare la durata, diamo un'occhiata alla manutenzione del tester adesivo iniziale:
Manutenzione a breve termine:
1, per controllare regolarmente se lo sfiato del tester di adesione iniziale è bloccato, and clean up the dust.
- Check whether the current and voltage of the equipment are normal and whether the line is aging.
- Controllare se il tester di adesione iniziale funziona normalmente.
- Clean the dust in the inner cavity of the equipment.
Long maintenance:
- Check whether the circuit and switch are normal.
- Check whether all power supplies of the equipment are normal.
- The transformer insulation of the initial adhesion tester is not less than 5 megohm. If it cannot be reached, the transformer must be re-dried.
4, the adjustable mechanical parts of the full range of adjustment, the number of not less than 3 volte.
- Calibrate the accuracy of the equipment once every 2 times of maintenance.
The above is about the maintenance method of the initial adhesion tester, I hope we should do a good job in maintenance of the related work.