7006-28A-1 Calibro con tappo a vite E27 Calibro di arresto

IEC60335 plug torque test device Dispositivo per test di coppia della spina IEC60335
ICP-MS6880 inductively coupled plasma source mass spectrometer
11
114
113
112
110
11
114
113
112
110

7006-28A-1 Calibro con tappo a vite E27 Calibro di arresto

Categorie: , Tag:

  • Descrizione
  • Inchiesta

7006-28A-1 Calibro con tappo a vite E27 Calibro di arresto

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
E27 Lamp holder gauge name

Soddisfa lo standard: standard di progettazione 60061; GB1483.1
Product category:
E27 Lamp holder gauge Pass Gauge 7006-27B-1
E27 Screw cap gauge Stop 7006-28A-1
E27 Lamp holder Solder Height Gauge 7006-27C-1
E27 Screw cap Contact performance Gauge 7006-50-1
E27 Lamp holder Anti-accidental contact gauge (anti-electric shock) 7006-51A-2
​7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge

ReferenceDimension/ dimension (mm)Tolerance/ tolerance (mm)
D26.05+0.0/-0.01
I coefficienti di attrito dei cateteri e dei tubi di alimentazione nasale contro la pelle umana influenzano direttamente la sensazione di benessere del paziente16.5±0,1
ECA1+0.0/-0.1
V17.0+0.05/-0
W2±0,1
UN Nom. Nominal value 45°
Weight/ mass0.15KGazoto 0,1-0,15 mpa ossigeno 0,1-0,15 mpa ingresso gas misto ossigeno/azoto

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Scopo:

To check the minimum outside (major) diameter of the screw thread.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Testing :

When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the center contact shall not project beyond surface “X”. Only the weight of the gauge itself shall be used in the test.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Scopo:

To check the minimum outside (major) diameter of the screw thread.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Scopo:

To check the minimum outside (major) diameter of the screw thread.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Testing :

When the gauge is placed over the thread of the cap on a finished lamp, held cap uppermost, the center contact shall not project beyond surface “X”. Only the weight of the gauge itself shall be used in the test.

7006-28A-1 Screw cap gauge check gauge Not Go Gauge E27 lamp holder gauge
Scopo:

To check the minimum outside (major) diameter of the screw thread.

7006-28A-1 Calibro con tappo a vite E27 Calibro di arresto

​​

Contattaci





prodotti correlati