- Deskripsi
- Penyelidikan
Viskometer Layar Sentuh
Fitur utama:
- Using ARM technology, built in Linux system. Antarmuka pengoperasiannya sederhana dan jelas, through the test program to create and dataAnalysis, rapid and easy to carry out the viscosity test;
- The viscosity measurement is accurate, each range is automatically calibrated with the computer, the accuracy is high, and the error is small;
- Tampilan konten yang kaya: in addition to the viscosity, dan suhu, tingkat geser, tegangan geser, measurement for the full-scale value percentage (grafis), pemindaian otomatis, overflow alarm range, the maximum measurement range, the rotor speed under the combination of the date, time and so on. And it can show the kinematic viscosity in the case of known density, great to meet different measurement requirements of users;
- Function is complete, can be measured regularly, 30 serangkaian prosedur pengujian, access to the 30 sets of measurement data, real-time display of viscosity curve, print data and curves, dll.;
- Pre – level meter, the level of direct and convenient adjustment
- Pemeriksaan suhu opsional, viscometer special constant temperature bath, cangkir suhu konstan, Modul pendingin internal digunakan untuk mempersingkat waktu pendinginan antara kedua pengujian, standard samples (standard oil viscosity) dll.;Widely used in all kinds of fluid need to measure viscosity. Including paint, cat, tinta, kosmetik, bubur kertas, makanan, minyak, pati, solvent based adhesive, getah, biochemical products and so on.Parameter teknis terperinci:
Model LVDV-1T Kontrol / mode tampilan 5 layar sentuh berwarna inci speed(r/min) 0.3,0.6,1.5,3,6,12,30,60 0.5,1,2,2.5,4,5,10,20,50,100
measuring range mPa.s 0.6~ 2,000,000(0 ~ 4# rotor) 10~200,000(21/27/28/29# rotor)
Measurement of 10 below the ultra low viscosity to buy 0# rotor rotor 1 – 4#(standard configuration) 0#rotor (Select configuration)
21/27/28/29#rotor(Select configuration)
Kesalahan pengukuran (Newton liquid) ± 1% Repetition error (Newton liquid) ±0. 5% Fungsi pengaturan waktu konfigurasi standar Suhu measuring function
Standard temperature probe interface (need to select the temperature probe configuration)
Fungsi pemindaian otomatis Automatic scanning and recommendation of the best combination of rotor and speed
Display the maximum measurement range The range of viscosity can be measured by the combination of the selected rotor and rotational speed. Tegangan geser / tingkat geser
menampilkan Display kinematic viskositas
Need to enter the density of the sample Establish measurement procedures Dapat menghemat hingga 30 kelompok (termasuk rotornya, kecepatan, suhu, Pengguna dapat memilih prosedur pengujian bawaan atau mengatur parameter pengujiannya sendiri, dll.)
Save measurement results Dapat menghemat hingga 30 kumpulan data (termasuk viskositas, suhu, rotor, kecepatan, tingkat geser, tegangan geser, Pengguna dapat memilih prosedur pengujian bawaan atau mengatur parameter pengujiannya sendiri, massa jenis, viskositas kinematik, dll.) Viscosity time curve real-time display Mencetak Print data, melengkung (standard print interface, should choose to buy a printer)
Constant temperature unit
Options (including all kinds of special thermostat thermostatic cup viscometer.)
Modul pendingin internal digunakan untuk mempersingkat waktu pendinginan antara kedua pengujian 110V. / 60Hz or 220V / 50Hz Outline dimension 300 × 300 × 450(mm) Pilihan:
- Ultra low viscosity adapter (0# rotor)
Satu set tiga potong (rotor, contoh ember,bingkai penghubung)For the measurement of ultra low viscosity samples below 15mPa.S.
Jumlah sampel yang dibutuhkan untuk setiap pengukuran adalah 18-20ml ,Akurasi pengukuran adalah 0.1mPa.S
- Small sample adapter
By 21#, 27#, 28#, 29# and the like rotor
barrel and connecting frame,
The sample size for each measurement is 18ml.
- Pemeriksaan suhu (sensor temperatur)
High precision temperature measurement chip
with A/D conversion in American Production
Jarak pengukuran: 100 – 0
Akurasi pengukuran: 0.1
- Printer termal mikro
Dapat langsung dihubungkan dengan viskometer
mencetak data
Kurva cetak
5.Viskometer mandi termostatik khusus
DC0506N:
Kisaran suhu: -5 untuk 100
Kontrol suhu presisi: 0.1
Modul pendingin internal digunakan untuk mempersingkat waktu pendinginan antara kedua pengujian: 220V., 50Hz
CH1006N:
Kisaran suhu: room temperature and 10 untuk 100
Kontrol suhu presisi: 0.1
The circular opening can be placed 200ml beaker and direct viscosity
The external circulation function can also be controlled by the constant temperature liquid lead
To the outside of the constant temperature cup, to meet different test requirements