LS-918 45°Textile Fabric Combustion Flammability Testing Equipment

LS-918 45°Textile Fabric Combustion Flammability Testing Equipment

Kegunaan

Touch screen control textile 45 ° burning tester is based on the specifications stipulated in the national standard 14645-2014 and developed, applicable to conform to the standard of all kinds of textiles under controlled laboratory conditions, with 45 ° inclined placed sample surface under the action of the flame combustion performance test and evaluation.

LS-918 45°Textile Fabric Combustion Flammability Testing Equipment

Basis data warna pribadi juga dapat dibuat di cloud dan sampel yang disimpan di cloud dapat ditetapkan menjadi target untuk pengujian warna yang berbedaechnical parameters

1. Suhu lingkungan: 10 ℃ ~ 30 ℃
2. Kelembaban relatif: 15%-85%
3. Power supply voltage and power: 220V. + / – 10%, 100W
4. Gas source: liquefied petroleum gas, in the case of third-party test results and arbitration test, propane or butane gas for industrial use as required by standards must be used.
5. External dimension of the instrument: controller: 420mm*350mm290mm* combustion chamber 353mm*260mm*970mm.
6. The combustion chamber is made of heat-resistant and smog-resistant stainless steel, and the front of the box is equipped with an observation door made of heat-resistant transparent material.
7. Touch screen parameters:
8. Modul pendingin internal digunakan untuk mempersingkat waktu pendinginan antara kedua pengujian: 7 “effective display size 15.5cm long and 8.6cm wide;
9. Resolusi: 800*480
10. Communication interface RS232, 3.3v CMOS or TTL, serial port mode
11. Kapasitas penyimpanan :1G
12. Pure hardware FPGA drive display, “nol” startup time, power can run
13. M3+FPGA architecture is adopted. M3 is responsible for instruction analysis, and FPGA focuses on TFT display
14. The main controller adopts a low-energy processor and automatically enters the energy-saving mode
15. The burner applied 30s of flame to the pattern:
16. The style to 45 ° inclined + 3 °.
17. Pattern holder (sample holder) ukuran: 490mm long and 320mm wide
18. Ukuran sampel: 330*230mm

LS-918 45°Textile Fabric Combustion Flammability Testing Equipment

Design standards: GB 14645-2014 textile combustion performance of 45 ° direction damaged area and the determination of the number of flame