- Deskripsi
- Penyelidikan
LS-204-1 Industrial Oven Uses
This machine can provide a stable test space for pre-heating, drying, changes about physics and chemistry testing . It supplys precision temperature controllter with high stability of platinum resistance to temperature that makes temperature well-distribution.
LS-204-1 Industrial Oven
Structure And Size
- Inner size: 450(lebar) Penguji Abrasi Taber 400(depth) Penguji Abrasi Taber 400(tinggi)mm
- External size: 720(wide) Penguji Abrasi Taber 580(deep) Penguji Abrasi Taber 990(tinggi)mm+110mm trundle, subject to the real object;
- Operation panel: the control panel is above the machine (as shown);
- Opening method: single door opens from right to left;
- Viewable window: visible window on the door: spesifikasi: W200*H250mm;
- The inner material is: 430# mirror plate, 1.0mm thick;
- The outer material is: cold-rolled steel plate, 1.0mm thick.
- Interlayer: there are two inner layers, and two meshes;
- Thermal insulation material: glass fiber rock wool, with good thermal insulation effect;
- Sealing material: high-temperature foamed silica gel bar;
- Install brake movable casters on the machine;
- The overall structure is floor-type.
Temperature control sistem
- The temperature control instrument is PID digital display instrument (taichung instrument in Taiwan), single-point temperature control, which can be automatically calculated, PV/SV simultaneously displayed, button setting;
- Timer setting: from 1 second to 9999 jam (optional setting hours, minutes and seconds) when the temperature reaches time, when the heating current is stopped, and an alarm is prompted at the same time;
- Temperature line (K) jenis;
- Signal output is 3-32v;
- The heating controller is: solid relay SSR without contact;
- Heating material: heat resistant tube;
- temperature range: 50 ~ 300 ℃ adjustable, commonly used temperature within 260℃;
- rate of temperature: 100 ℃ about 15 menit
- the control precision, Indikasi undervoltage catu daya 0.5 ℃;
- display precision: 0.1 ℃
- temperature deviation: 50-200 ℃ ±2.0 ℃, 201-300 ℃±3.0 ℃. (no-load test)
LS-204-1 Industrial Oven
Air supply system
- Air supply mode: internal horizontal hot air circulation;
- The motor is temperature-resistant special type, with motor power of 370W/220V;
- The fan is 7.5-inch multi-wing turbine type;
- The air inlet is on the right side of the machine and the air outlet is on the left side of the machine.
Kekuasaan Supply Device
- Voltage AC 220V single-phase 50HZ
- Current 16A
- Kekuasaan: 3.5kw