- תיאור
- חֲקִירָה
LS-101-1 Melt Flow Index Tester
Discription:
Melt flow rate testing instrument can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined.
ה:
GB/T3682-2018,ISO1133-2011, ASTM D1238
LS-101-1 Melt Flow Index Tester
אופי מוצר:
1.English LCD Touched Screen.Ø
2.Hand automatic cutting material.
3.Double temperature control system, temperature control precision is more accurate, higher heating efficienc
4.Double imported sensors, more accurate temperature gradient from top to bottom, can be used independently, and improve the service life.
- Cylinder for imports hartz alloying nitriding treatment, opening mould for carbon tungsten steel material, material reality.
6.Insulation barrels of sus304 stainless steel material for the whole, long-term high temperature does not rust.
7.Automatic calculation results, and print.
Test Methods:MFR Methods
Display Mode:English color touch screen display
LS-101-1 Melt Flow Index Tester
מִפרָט
| דֶגֶם | LS-101-1 |
| Barrel parameters | Inner hole 9.550±0.005mm |
| Pistons parameters | Piston head: 9.474±0.005mm |
| Outlet length | 8.000±0.025mm |
| Paramters | Extrusion hole 1=2.095±0.005mm |
| Temperature parameter | With intelligent temperature control instrument, with four pairs of significant temperature setting control, PID parameters can be automatically set, precision up to ± 0.1 degree centigrade |
| טווח טמפרטורות | Room Temperature~450degree centigrade |
| תנודת טמפרטורה | ±0.2 ℃ |
| Temperature uniformity | ± 1 ℃ |
| Temperature display resolution | 0.1℃ |
| Display resolution | 0.1℃ |
| Maximum comsuption | < 600W |
| Time display resolution | 0.1ס |
| Weight parameters are as follows: | |
| Weight accuracy | ± 0.5% |
| Basic configuration
| A 0.325kg |
| B 1.2kg | |
| C 2.16kg | |
| D 3.8kg | |
| E 5kg | |
| F 10kg | |
| G 12.5kg | |
| H 21.6kg | |
| Position detection | |
| Loop distance from up and down | 30מ"מ |
| Control precision | ± 0.1mm |
| Test flow control | |
| Times of cutting the material | 0~10 times |
| Material cutting interval | 0~999s(set reference Table 2) |
| Control flow reaches the set temperature without volatility | |
| Barrel temperature time | 15 דקה. |
| Material be installed | 1 דקה. |
| Material sample temperature recovery time | 4 דקה. |
| When binder set | 1דקה |
| מצב פלט | Micro-automatic print output |
| Cut material methods | The hand automatic cut into one body |
| Test load | Eight sets of weights |
| כּוֹחַ | AC220V±10% 50/60HZ |
Accessories List
| לא | שֵׁם | כמות | Remark |
| 1 | מִשׁקָל | 1 מַעֲרֶכֶת | 0.325㎏、0.875㎏、1.835㎏、2.5㎏、2.915㎏、3.475㎏、4.615ק"ג、5.0k g |
| 2 | Weight tray | 1יח ' | Within level 1 לִטעוֹן |
| 3 | Charging hopper | 1יח ' | |
| 4 | Mouth mold cleaning rod | 1יח ' | |
| 5 | Charging bar | 1יח ' | |
| 6 | Cylinder cleaning rod | 1יח ' | |
| 7 | piston rod | 1יח ' | |
| 8 | mouth mold | 1יח ' | |
| 9 | gauze | 2גָלִיל | |
| 10 | Print paper | 2 גָלִיל |
Standard test force（8 level）
1 level：0.325 kg=（piston rod+weight tray+heat insulation cover+No 1 weight）
=3.187N
2 level：1.200 kg=(0.325+No2 0.875 מִשׁקָל)=11.77 N
3 level：2.160 kg=(0.325+No3 1.835 מִשׁקָל)=21.18 N
4 Level：3.800 kg=(0.325+No4 3.475Weight)=37.26 N
5 Level：5.000 kg=(0.325+No.5 4.675Weight)=49.03 N
6 Level：10.000 kg=(0.325+No.5 4.675weight+No.6 5.000Weight)=98.07 N
7 Level：12.000 kg=(0.325+No.5 4.675weight+No.6 5.000+No.7 2.500weight)=122.58 N
8 level：21.600 kg=(0.325+No.2 0.875weight+No3. 1.835+No.4
3.475+No.5 4.675+No.6 5.000+No.7 2.500+No.8 2.915weight)=211.82 N
Chart 1
| Melt flow rate (g/10min) | Sample quality in charging barrel (ז) | Extrudate cutting-off interval time (ס) |
| 0.1-0.5 | 3-5 | 240 |
| >0.5-1 | 4-6 | 120 |
| >1-3.5 | 4-6 | 60 |
| >3.5-10 | 6-8 | 30 |
| >10 | 6-8 | 5-15 |
| 1. If this experiment value is less than 0.1 ז / 10 min or greater than 100 ז / 10 דקה, suggest you melt flow rate
| ||
Chart 2
| Material | Test temperatureθ,℃ | Standard load mnom，ק"ג |
| PS | 200 | 5.00 |
| פ | 190 | 2.16 |
| פ | 190 | 0.325 |
| פ | 190 | 21.60 |
| פ | 190 | 5.00 |
| עמ' | 230 | 2.16 |
| ABS | 230 | 10.00 |
| PS-1 | 200 | 5.00 |
| E/VAC | 150 | 2.16 |
| E/VAC | 190 | 2.16 |
| E/VAC | 125 | 0.325 |
| SAN | 220 | 10.00 |
| ASA、ACS、AEC | 220 | 10.00 |
| PC | 300 | 1.2 |
| PMMA | 230 | 3.8 |
| PB | 190 | 2.16 |
| PB | 190 | 10.00 |
| POM | 190 | 2.16 |
| MABS | 220 | 10.00 |
מוצרים קשורים
קרא עודמבט חטוףLS-113-2 Dual Taber Abrasion Tester
קרא עודמבט חטוףLS-114 Small plate vulcanizing machine（Lab use）
קרא עודמבט חטוףLS-101-3 Electronic Loading Melt Flow Index Tester
קרא עודמבט חטוףLS-108 Notch Sample Machine
קרא עודמבט חטוףLS-102 IZOD Impact Tester
קרא עודמבט חטוףLS-109 Electric Notch Machine
קרא עודמבט חטוףLS-115 Manual Rockwel Hardness Tester
קרא עודמבט חטוףLS-110 Densimeter
קרא עודמבט חטוףLS-107 Small Vulcanizer Machine 10T
קרא עודמבט חטוףLS-111-2 Moisture Meter