LS-903 Needle-flame Tester

LS-903 Needle-flame Tester

The reference standard

CEI 884-1, GB2099.1, VDE, IEC335, GB4706.1, GB5169.5, UL1694.

LS-903 Needle-flame Tester

Spécifications techniques

This product according to used in electronic, electrical products due to fault conditions, such as through the leak path of fault current, components or parts of overheating, such as bad contact also may cause fire, it may be shot into the nearby on the part of the test is simulation under fault conditions inside the product produced by the small flame, simulation technology is used to evaluate the fire risk.For small parts (or components) hot wire test or horizontal – vertical combustion test method is not suitable, can cite needle flame test method.If the sample is ignited during the hot wire test, a needle flame test is required for the combustion hazard.Suitable for electronic electrical products, household appliances, Composants, tel que: terminal, centrifugal switch, electric rice cooker socket.

LS-903 Needle-flame Tester

Les spécifications de base

1) volume of the box: ≥0.5 m3 , avec porte d'observation vitrée

2) fuel: butane gas

3) burner specification: plus que 35 mm long, inner Ø0.5mm±0.1mm,Outside diameter less than Ø 0.9 mm

4) flame height: 12mm ± 1mm adjustable

5) flame temperature: 100 ℃ to 700 ℃ within 23.5 ± 1 S

6) minuteur: adjustable within the range of 0 ~ 99 minutes and 99 secondes, the combustion time can be set, and the combustion duration can be recorded

7) caractéristiques du produit: the combustion chamber and main mechanical parts of this tester are all made of stainless steel, with beautiful shape, smoke resistance and gas corrosion resistance.Time and digital display, three – dimensional adjustable fixture, automatic control system, independent ventilation, easy to use observation records, stable and reliable.With a temperature measuring device.

8) source de courant: AC220V / 50Hz