LS-606 Automatic Cupping Tester

LS-606 Automatic Cupping Tester

Utilisation

Used for testing the extension and damage of single and multiple coating coatings on metal substrate.
– motor drive the punch has a very high reproducibility.
– no zero steel plate, automatic zero after test, no accumulated error
– position sensor with high precision, sag precision can reach 0.01 mm
– the attached standard 10 times with lamp magnifying glass, convenient observation and judgment test results
– the largest measured 1.25 mm thick plates
– digital display, all functions are controlled by two buttons

LS-606 Automatic Cupping Tester

Operation pas
Insert plates instrument openings, besmear level up
The power of the medium using the clamping device clamp plate
Start the cup drawing instrument, and through a magnifying glass observation test plate surface
At a constant speed is 0.2 mm/s automatic ball on top
Observed the first crack, immediately stop cup drawing instrument
Digital display screen read cup drawing depth values
At least three times of a test plate test

LS-606 Automatic Cupping Tester

Test Sstandard
Go/T 9753-2007 color paints and varnishes – cup drawing test
ISO 1520-2006

paramètres techniques