- La description
- Enquête
G / D 240 Testeur automatique de point d'éclair
Présentation
G / D 240 Automatic Flash Point Tester is designed by rapid equilibrium closed cup method. It can rapidly test flash point of coating, Peinture (water-based paint), vernis, lacquer base, adhésif, solvent, Fatty acid methyl ester(FAME), chemical reagent, flavor, spices, solid chemical products, viscous chemical products, , air fuel oil, petroleum and related products.
It conforms to ISO 3679,ISO 3680,ASTM D 3278,ASTM D3828 etc
Personnages
◆ Can detect the flash point at a specific temperature between -35 ℃ and 105 ℃ (BGD 240/1)or RT to 105 ℃(BGD 240/2)at average rate heating.
◆ All functions are achieved through the membrane keypad and digital display.
◆ Users can select the built-in test procedures or set its own test parameters,also can modify the preinstall program to implement custom non-standard test.
◆ Built in two test procedures:rapid balanced mode and average rate heating mode
◆ Various parameters, such as the heating mode, temps, temperature and the average rate heating can be set by the user themselves.
◆ Planning board action, the decline of the ignition, the detection of flash point is done automatically.
◆ A voice is prompted to user at each operation, at the end of the test there will be voice prompts, too.
◆ The gas ignition sources can be provided directly by the laboratory, you can also use the portable butane gas tank.
◆ Built-in cooling module is used to shorten the cooling time between the two tests.
Amend barometric pressure automatically
Paramètres techniques principaux
■ Flash Point Temperature Range:Pour BGD 240/1:-35℃ to 105℃;Pour BGD 240/2: RT to 300℃
■ Tested Flash Point Temperature Accuracy:0.5℃
■ Volume de l'échantillon:2ml
■ Heating Rate:Customize, quickest speed 5℃/min, longest duration 99min, highest temperature 100℃ (300℃)
■ Cooling Method:Built-in cooling module (without external cooler 0℃~100℃)
■ Output Interface:Computer RS232, printer (enduit de tige et autres outils pour le revêtement)
■ Taille:400×220×170mm
■ Poids net: 6 KG
■ Operate Temperature: 15℃~35℃
■ Source de courant:220/240V,50/60Hz
■ Come with Accessories:Steam source regulation component,Silicone tube,2ml injector,Thermometer 0~100℃,O-Type Seal Ring(5pcs)
■ Accessoires optionnels:Special injector for high viscosity(thick)sample,Powdery object injector 4ml injector,Stand oil of Flash Point (49.7℃)