NOUVELLES - Page 15 de 77

16 Nov

ASTM D1149-2018 Standard Test Method for Rubber Breakage and Cracking in Ozone-Controlled Environments

Signification et utilisation 4.1 The significance of these test methods lies in the ability to distinguish the degree of ozone resistance under limited and specific conditions of accelerated testing. The degree of resistance is judged by the appearance and size of cracks formed on the surface of the material under test. 4.2 In use, rubber materials deteriorate when exposed to ozone. There needs to be a test method in which simple, accelerated time/exposure, comparing the ability of the material to resist [...]

16 Nov

ASTM D1248-2016 Standard Specification for Polyethylene Plastic Extruded Materials for Wire and Cable

The code specifies the identification of polyethylene plastic extrusion materials for wire and cable so that sellers and buyers can agree on the acceptability of different commercial batches or shipments. Polyethylene plastics are primarily identified based on two characteristics, namely density and flow rate (formerly known as melt index). The former is the criteria for type assignment as follows: Taper 0, Type I, Type II, Type III, and type IV, while the latter is used to specify categories, à savoir: [...]

14 Nov

Méthode d'essai standard ASTM D4279-2017 pour la transmission de la vapeur d'eau dans les navires de transport – Méthodes constantes et cycliques

Signification et utilisation 4.1 Ces méthodes de test sont généralement utilisées aux fins suivantes: 4.1.1 Évaluer les matériaux et la construction d'un type particulier de conteneur, 4.1.2 Comparer les performances de différents types de conteneurs, 4.1.3 Déterminer si la protection d'un produit ou d'une application particulière est adéquate, et 4.1.4 Maintenir le contrôle qualité. Méthode d'essai standard ASTM D4279-2017 pour la transmission de la vapeur d'eau dans les navires de transport – Constant and Cyclic Methods Step 1: Portée 1.1 These test methods cover the determination of the water vapor transmittance [...]

14 Nov

Spécification standard ASTM D4169-2016 pour les tests de performance des conteneurs et systèmes d'expédition

Signification et utilisation 4.1 La pratique fournit des conseils pour évaluer les unités de transport à l'aide d'un système uniforme et en utilisant des méthodes de test établies pour représenter les niveaux dans la distribution réelle.. Les niveaux de test recommandés sont basés sur les informations disponibles sur l'environnement d'expédition, de chargement et de déchargement et sur les pratiques et expériences actuelles de l'industrie/du gouvernement. (1-13). 6 Les tests doivent être effectués sur les mêmes conteneurs dans l'ordre indiqué. À utiliser comme test de performance, this practice requires that the transport unit under [...]

14 Nov

ASTM D3654/D3654M-2019 Standard Test Method for Shear Adhesion of Pressure-Sensitive Tape

Signification et utilisation 4.1 Procedure A measures the ability of the pressure-sensitive tape to adhere to a standard steel plate under constant stress. This may or may not involve the tape’s ability to adhere to other surfaces. 4.2 Procedures B, C and D may be used to determine the shear adhesion of tape commonly used to seal fiberboard boxes in packaging applications. 4.3 Procedure D measures the shear adhesion of pressure-sensitive tape to non-standard fiberboard, lining board, corrugated cardboard or other tested [...]

14 Nov

ASTM D3759/D3759M-2019 “Standard Test Method for Breaking Strength and Elongation of Pressure Sensitive Tape”

Signification et utilisation 5.1 The information provided by this test method can be used for material specifications for product design and quality assurance applications. Can be used to compare different products. 5.2 The use of the test method must be related to the test purpose. One purpose is to determine the relative strength of the tape at the time of purchase or use. Another aim is to identify or characterize a specific backing material. 5.2.1 The test may be performed on the [...]

14 Nov

ASTM D3815/D3815M-2019 Standard Practice for Accelerated Weathering of Pressure Sensitive Tape with Open Flame Carbon Arc Exposure Equipment

Signification et utilisation 4.1 This practice does not necessarily directly simulate natural weathering exposure. 4.2 The results of this practice shall not be represented as equivalent to the results of any natural weathering test until the satisfactory relevance of the relevant material has been established. 4.3 Results may vary when operating conditions vary within the acceptable range of the instruments specified in Practice G151 and G152. ASTM D3815/D3815M-2019 Standard Practice for Accelerated Weathering of Pressure Sensitive Tape with Open Flame Carbon Arc Exposure [...]

13 Nov

ASTM D4498-2015 Standard Test Method for Thermal Failure Temperature in Hot Melt Adhesive Shear

Signification et utilisation 4.1 Thermal failure Temperature A limit temperature is set at which the adhesive shall not be exposed during use under shear loads. Étape 1: Portée 1.1 The purpose of this test method is to determine the temperature of the stratification of samples bonded with hot melt adhesive under static shear forces. 1.2 Les valeurs exprimées en unités SI doivent être considérées comme standard. Les valeurs données entre parenthèses sont à titre indicatif. 1.3 Cette norme n'est pas destinée à répondre à tous les problèmes de sécurité [...]

13 Nov

ASTM D4499-2015 Standard Test Method for Thermal Stability of Hot Melt Adhesives

Signification et utilisation 5.1 Hot melt adhesives usually need to be used at higher temperatures to make the viscosity of the adhesive low enough that it can be easily handled in typical hot melt equipment. Adhesive changes caused by exposure to the harsh environment required for hot melt processing can disrupt the adhesive application process and may affect the quality of the adhesive bond. Changes in adhesive viscosity may affect the amount of adhesive dispensed by the sizing machine. Phase [...]

13 Nov

ASTM D5105-2019 Standard Practice for Accelerated Outdoor Weathering of Pressure-Sensitive Tape Using Concentrated Natural Light

Signification et utilisation 4.1 This practice provides a way to qualitatively assess the impact of outdoor weathering on pressure-sensitive tapes. The resistance of the strip to outdoor weather is determined relative to the resistance of the control strip with known stability. 4.2 If the tests described in this practice produce the same type of degradation as in real time exposure to the same material, the results of these short-term tests may be used to determine the quantitative effects of natural weathering. 4.3 [...]