Signification et utilisation
5.1 The test method determines the coverage of the test coating by visually evaluating the sprayed coating.
Noter 1 Test method D2805 describes an instrumental method for determining coverage. Apply the film to a uniform thickness (par exemple. with a scraper), measure the film thickness strictly, and determine the opacity by photometry. Thus the concealment force can be determined with high precision.
5.2 Test method D6762 is not as accurate as test method D2805, but it is widely used because it is closely related to the application characteristics of paints and is simpler in terms of concept and evaluation.
ASTM D6762-2018 “Détermination du pouvoir couvrant des revêtements par auto-évaluation des revêtements de construction par pulvérisation”
Étape 1: Portée
1.1 This test method enables quantitative visual determination of the film thickness required for complete coverage. The film thickness is considered to test the coating’s hiding power.
1.2 The method is applicable only to sprayed coatings, but the concept can also be applied to other applications.
1.3 Values expressed in inches to pounds shall be treated as standard values. The values given in brackets are mathematical conversions of SI units for reference only and are not considered as standards.
1.4 This standard is not intended to address all safety issues associated with its use. Il est de la responsabilité des utilisateurs de cette norme d'établir des mesures de sécurité appropriées., pratiques sanitaires et environnementales et pour déterminer l’applicabilité des restrictions réglementaires avant utilisation.
1.5 Cette norme internationale est basée sur les principes de normalisation internationalement reconnus établis dans la Décision sur les principes pour l'élaboration de normes internationales., Lignes directrices et recommandations émises par le Comité des obstacles techniques au commerce de l'OMC (OTC).
ASTM D6762-2018 “Détermination du pouvoir couvrant des revêtements par auto-évaluation des revêtements de construction par pulvérisation”
2. Se référer au dossier
Norme ASTM
D16 Paints, terms related to coatings, materials and applications
Practice of preparing cold rolled steel plates for testing paints, vernis, conversion films and related coating products
D1005 Test method for dry film Thickness of organic coatings using a micrometer
D1729 Visual evaluation of diffuse reflection of opaque materials for color and chromatic aberration practice
Method for preparing D1730 coated aluminum and aluminum alloy surfaces
D2805 Test method for Covering power of coatings by reflection
D7091 Nondestructive measurement of dry film thickness for non-magnetic coatings for ferrous metals and for non-magnetic, non-conductive coatings for ferrous metals
E691 Practice of conducting interlaboratory studies to determine the accuracy of test methods