- Deskrip
- Pagtatanong
LS-101-3 Fully Automatic Melt Flow Index Tester
1.Panimula ng Produkto:
This tester for high precision automatic melt flow rate instrument, ginamit para sa pagsubok ang lahat ng uri ng plastic, dagta sa estado ng viscous daloy sa pamamagitan ng isang tiyak na temperatura at load, bawat 10 min module at melt daloy rate sa pamamagitan ng standard port MFR/MVR halaga, ito ay angkop para sa mataas na temperatura ng polycarbonate, aromatic sulfone, fluorine plastik, nylon engineering plastik, maaari ring inilathala sa polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS dagta, polyformaldehyde (POM), polycarbonate (PC) dagta na may mas mababang melting temperatura, tulad ng plastic pagsubok, malawak na ginagamit sa plastic produksyon,Plastic products, petrochemical and other industries and related institutions, scientific research units and commodity inspection departments.
2.Subukan ang pamantayan:
GB/T3682-2018 | Measurement of melt flow rate and melt volume flow rate of thermoplastic plastics |
ISO 1133:2011 | Determination of mass flow rate MFR and melt volume flow rate MVR of thermoplastic melt |
ASTM D1238-13 | Standard test method for flow rate determination of thermoplastic melt by extruded plasticimeter |
LS-101-3 Fully Automatic Melt Flow Index Tester
3.Product advantage:
- Ø more paragraphs (2) paraan ng pagkontrol ng temperatura, two groups of platinum resistance sensor, two heating jacket separate temperature control, mataas na katumpakan intelligent PID control, ramp rate ang bilis ng pagpainit ay adjustable
- Ø resolution temperature was 0.1 °C, the temperature uniformity of 0.2 °C, ang temperatura pagbaluktot ng hindi higit pa kaysa sa 0.5 °C sa loob 24 oras, ang displacement sensor resolution ay 0.001 mm.
- Thermal protection device
- Ø hand automatic cutting material, ay maaaring arbitraryong magtakda ng blangko oras (0 ~ 999), blangko beses (0 ~ 999)
- Ø test can choose quality standard, o paraan ng volyum, dalawang paraan ng pagsubok o sabay-sabay, and can melt density is calculated.Both methods are tested when the piston rod moves to a certain position.
- Ø stable internal temperature alarm prompts, and an increase of 240 segundo (GB3682 regulasyon) materyal preheat pangalawang countdown, pagkatapos ng dulo ng countdown, issued a prompt, maaari ring itakda ang pamantayan ng Amerika (ASTM) preheating oras, atbp.
- Ø built-in many plastic material melt index test conditions, maginhawang customer na ginagamit upang makuha sa anumang oras, bawasan ang mapanganib na trabaho, at pag-iimbak ng huling mga kondisyon sa pagsubok at mga resulta
- Built – in mini printer for easy printing test data
- Ø high precision touch screen controller, 7 i-inch ang screen ng touch, ay maaaring naka-imbak at i-print ang mga kondisyon ng pagsubok at data kamakailan, kabilang sa test menu Settings ang oras ng pagsubok (ang default) system, operating personnel, material name, test method, mga kondisyon sa pagsubok (temperatura, timbang timbang, blanking interval) mga datos, Mga resulta ng pagsubok, Mga resulta ng pagsubok, the artificial judgement OK or NG, atbp.,
- Ø reserved RS232 interface or USB interface to connect computers, maaari sa pamamagitan ng computer control instrumento operasyon at upang i-save ang data transmission sa computer,
- Ø need weight load, are installed in screen equipment to choose corresponding weight and loading that no user manual loading or bolt type selection, reduce the workload.Test completion self – rising.
Mga Paraan ng Pagsubok:MFR +MVR Paraan
Modong Displey:Display ng kulay ng Ingles
- Technical Speicification
Modelo | LS-101-3 |
Barrel parameter | Panloob na butas 9.550±0.005mm haba ng 163mm |
Pistons ulo parameters | Piston ulo: 9.474±0.005mm |
Piston rod diameter | 8.94mm |
Haba ng amag | 8.000±0.025mm |
Mold nominal panloob na diameter | 2.0955±0.0051mm
|
Kalahating haba ng mamatay | 4.000±0.025mm |
Kalahati mamatay nominal panloob na diameter | 1.050±0.005mm |
Temperatura parameter | Gamit ang intelligent temperatura control instrumento, na may apat na pares ng makabuluhang temperatura setting control, PID parameter ay maaaring awtomatikong itakda, katumpakan hanggang sa ± 0.1 degree centigrade |
Temperatura hanay | Room Temperatura ~ 500degree centigrade |
Temperatura pagbabago | ±0.2 °C |
Temperatura unipormeng | ±1°C |
Temperatura display resolution | 0.1°C |
Magdispley ng resolusyon | 0.1°C |
Pinakamataas na pagsabog | < 600W |
Resolusyon ng oras ng display | 0.1s |
Timbang parameter ay ang mga sumusunod: | |
Timbang katumpakan | ±0.5% |
Pangunahing kumpigurasyon
| A 0.325kg |
B 1.2kg | |
C 2.16kg | |
D at T 3.8kg | |
E 5kg | |
F 10kg | |
G 12.5kg | |
H 21.6kg | |
Pagtukoy ng posisyon | |
Loop distansya mula sa pataas at pababa | 30mm |
Kontrol katumpakan | ± 0.1mm |
Pagsubok daloy control | |
Mga panahon ng pagputol ng materyal | 0~ 10 beses |
Materyal pagputol interval | 0~ 999s(itakda ang reference Table 2) |
Control daloy ay umaabot sa set temperatura nang walang volatility | |
Barrel temperatura oras | 15 min. |
Materyal na iniinstala | 1 min. |
Materyal halimbawa temperatura pagbawi oras | 4 min. |
Kapag nagtakda ng binder | 1min |
Modong Output | Output ng micro-awtomatikong pagprint |
Gupitin ang mga materyal na pamamaraan | Ang kamay awtomatikong hiwa sa isang katawan |
Pagsubok load | Walong set ng timbang |
Kapangyarihan | AC220V±10% 50/60HZ |
LS-101-3 Fully Automatic Melt Flow Index Tester
5.Parts list
Hindi | Pangalan | Unit | Qty | Pananalita |
1 | Host machine | Itakda ang | 1 | Include printer |
2 | Timbang | magset ng set | Total 8 antas ng,0.325 kg,1.200 kg,2.160 kg,3.800 kg,5.000 kg,10.000 kg,12.000 kg,21.600 kg | (1# within level 1) |
3 | Timbang tray | pc | 1 | within level 1 |
4 | piston gabay | pc | 1 | within level 1 |
5 | mouth model | pc | 1 | tungsten karbid |
6 | charging hopper | pc | 1 | hindi kinakalawang na asero |
7 | loading rod | pc | 1 | |
8 | Barrel cleaning lever | pc | 1 | |
9 | Mouth die Cleaning rod | pc | 1 | hindi kinakalawang na asero |
10 | Gauze | pc | 2 | |
11 | I-print ang papel | pc | 2 | |
12 | Iba pa | Certificate of quality, specification, one feeding plate |
- Software:
8.List of major accessories
Hindi | Pangalan | Unit | Qty | Pananalita |
1 | relay | magset ng set | 3 | Taiwang yangming |
2 | Temperature sensor | pc | 2 | UK RS PT100 |
3 | Paglipat ng Power | pc | 1 | Zhejiang hongbo |
4 | Heating | pc | 2 | High temperature resistant pure copper heating sleeve |
5 | Controller (kabilang ang touch screen) | pc | 1 | Self-developed intelligent multi-point temperature control system (kabilang ang 7-inch touch screen) |
6 | lifting motor | magset ng set | 1 | AC AC motor, plowway, Taiwan |
7 | cutting off motor
| magset ng set | 1 | Taiwan imports plowway direct current |
8 | transformer | magset ng set | 1 | Guangzhou baiyun |
9 | encoder | pc | 1 | Original Japanese omron |
6 | Mouth die | pc | 1 | tungsten steel |
7 | charging barrel | pc | 1 | Nitriding treatment of harwood alloy, corrosion resistance |
8 | printer | pc | 1 | Beijing weihuang |