- Popis
- Poptávka
Záznamník doby sušení linky
Doba schnutí
When developing a process, it is important to know the exact time it takes for the coating to dry or cure. There are many stages to the coating drying time. Once a coating has been applied, the first stage is that the coating levels off under gravity. Once a coating begins to cure, a thin dry film appears on the surface .
But how to know when a coating is totally dry?
Using the Drying Time Recorder, the operator can easily identify each of the stages of the drying process:
A ball tip is placed into the coating and, using the mathematical formula: Distance=Speed ×Time ; the Recorder begins to move this ball at a predefined speed. As the coating dries, the trace left in the coating by the ball identifies each stage of the cure.
The various stages of drying and curing that occur in films are easy to detect but difficult to define in terms of chemical and physical principles. In order to evaluate them correctly, it is necessary to use instrumentation under controlled conditions.
oOffers a versatile drying time recorder to help quantify the various stages of film curing and drying, deliver reproducible results, and guarantee highest efficiency:
This reliable apparatus to test the drying time or gelation behavior of many paints and coatings, applied onto a glass strip of 330mm×24mm by means of our cube applicator(LS 203).Hemispherical needles travel on these test tracks, over a selected time:6,12 ,24 a 48 h.
The drying time stages can be easily assessed with the graduation scale(according to traverse speed configuration). The total time for every test can be observed from the LCD screen.
1. Evaporation of solvent: deep pear-shaped impression
2. Sol-gel transition: continuous track
3. Surface dry: interrupted track
4. Final dry time:the needle no longer penetrates the film
Záznamník doby sušení linky
■ Simultaneous testing of 6 samples – saves time
■ Four different speeds:6-12-24-48 hrs – for any application
■ Styli Diameter (with rounded tip): 2mm±0.05mm (6 pcs)
■ Come with 6 pcs stainless steel weights for recording through drying
■ Přijďte s kalibračním certifikátem
■ Comply with standards:ASTM D 5895-03, ISO 9117-4
Související produkty
- Přečtěte si víceRychlý pohled
LS-641 Line Drying Time Recorder ASTM D 5895-03, ISO 9117-4
- Přečtěte si víceRychlý pohled
LS-625 Intelligent Line Drying Time Recorder
- Přečtěte si víceRychlý pohled
LS-618 Minimum Film Forming Temperature Tester ISO 2115 ASTM D2354
- Přečtěte si víceRychlý pohled
Minimální teplota tváření filmu (MFFT) Tester
- Přečtěte si víceRychlý pohled
BGD 264 kompletní tester doby schnutí
- Přečtěte si víceRychlý pohled
Minimální teplota tváření filmu (MFFT) Tester
- Přečtěte si víceRychlý pohled
LS-625 Intelligent Line Drying Time Recorder
- Přečtěte si víceRychlý pohled
BGD 264 Kompletní tester doby schnutí ISO 9117.1