- Popis
- Poptávka
Stroj na testování únavy při stlačení houby
Normy:
GB/T10807-89;ISO 2439-1980;JISK6401;ASTM D3574;TAK JAKO 2282.8 Method A-IFD Test.
Stroj na testování únavy při stlačení houby
Product Application:
Sponge /foam indentation hardness testing machine is also known as sponge, foam indentation hardness testing machine, tensile metallic and non-metallic, polymer materials, compression, ohýbání, detection of low cycle fatigue and other projects can be according to customer product requirements according to GB, ISO, ASTM, JIS, EN and other standards for the preparation, to automatically strike the biggest test, fracture strength, yield strength, pevnost v tahu, compressive strength, flexural strength, elastic modulus, elongation , constant elongation stress, elongation and other parameters given stress.
Main feature:
1.Automatic counting, automatic indentation of 80,000 times to stop there Pause
2. High precision pressure sensors and large-scale integrated circuits, accurate determination.
3. Can always manually adjust indentation load, to keep it at 750 Newton
Stroj na testování únavy při stlačení houby
Toto zařízení může simulovat různé podmínky prostředí:
| Sensing method | Force sensor automatic dispaly |
| Load Cell Capacity | 300Kg |
| Motor | Servo motor control system |
| Unit switch | Kg,N,Lb |
| Přesnost | 0.5 grade(±0,5 %) |
| Testing stroke | 200mm |
| Test rychlosti | 100±20mm/min |
| Size of upper compressing plate | Diameter 200mm |
| Bottom Border-radius | R1mm |
| Lower platform | 420mmx420mm |
| Air hole diameter | 6.0mm |
| Hole center gap | 20mm |
| Velikost vzorku | (380+10)mmx(380+10)mmx(50±3)mm |
| Napájení | AC220V |
