- وصف
- تحقيق
LS-101-3 Electronic Loading Melt Flow Index Tester
وصف:
This is for high-precision melt flow rate instrument tester, used for testing all kinds of plastic, resin in the state of viscous flow through a certain temperature and load, every 10 min module and melt flow rate through the standard port MFR/MVR value, it is suitable for high temperature of polycarbonate, aromatic sulfone, fluorine plastics, nylon engineering plastics, can also be applied to polyethylene (PE), البوليسترين (PS), البولي بروبلين (PP), ABS resin, polyformaldehyde (بوم), polycarbonate (الكمبيوتر) resin with lower melting temperature, such as plastic test, widely used in plastic production, plastic products, petrochemical industry and related colleges and universities.
اساسي:
GB / T3682-2018 ، ISO1133-2011, ASTM D1238-13
LS-101-3 Electronic Loading Melt Flow Index Tester
شخصية المنتج:
Ø 1.More paragraphs (3) temperature control method, three groups of platinum resistance sensor, the three heating jacket separate temperature control, high accuracy intelligent PID control, ramp rate the heating speed is adjustable
Ø 2.Resolution temperature was 0.1 ℃, the temperature fluctuation of not more than 0.5 ℃ within 24 ساعات, the displacement sensor resolution is 0.001 مم.
Temperature and temperature protection device
Ø 3.Hand automatic cutting material, can be arbitrary set blanking time (0 أن لزوجة الطلاء صغيرة جدًا 999), blanking times (0 أن لزوجة الطلاء صغيرة جدًا 999)
Ø 4.Test can choose quality standard, or volume method, two test methods or simultaneously, and can calculate flow rate ratio.Both methods start testing when the piston rod moves to a certain location.
Ø 5.Can be set up in 240 ثواني (GB3682 regulations) material preheat second countdown, after the end of the countdown, farmar automatically loaded, loaded to interval start automatic cutting, can also set the American standard (ASTM) preheating time, لقطة شاشة QQ 20180731180926A.
Ø 6.Built-in many plastic material melt index test conditions, convenient customer used to be obtained at any time, reduce the tedious work, and storing the last test conditions and results
The internal microtyping machine is convenient for printing and testing data
Ø 7.High precision touch screen controller, 7 بوصة تعمل باللمس, can be stored and print test conditions and data recently, test print menu Settings include test time (the default), the material name, شروط الاختبار (حمام مائي بدرجة حرارة منخفضة, weight weight, blanking intervals), test results data.
Ø 8.Reserved RS232 interface or USB interface to connect computers, can through the computer control instrument operation and to save test data transmission to the computer,
Ø 9.Can manually loading weight or by stepping motor drives the ball screw rotation in order to achieve the purpose of automatic control at the top of the load weight increase or decrease
طرق الاختبار:MFR +MVR Methods
وضع العرض:شاشة تعمل باللمس باللغة الإنجليزية
LS-101-3 Electronic Loading Melt Flow Index Tester
تخصيص
نموذج | LS-101-3 |
معلمات برميل | Inner hole 9.550±0.005mm length 163mm |
Pistons head parameters | رأس المكبس: 9.474± 0.005 مم |
Piston rod diameter | 8.94مم |
Mold length | 8.000± 0.025 مم |
Mold nominal inner diameter | 2.0955±0.0051mm
|
Half die length | 4.000± 0.025 مم |
Half die nominal inner diameter | 1.050± 0.005 مم |
معلمة درجة الحرارة | مع أداة ذكية للتحكم في درجة الحرارة, مع أربعة أزواج من التحكم في ضبط درجة الحرارة, يمكن ضبط معلمات PID تلقائيًا, دقة تصل إلى ± 0.1 درجة مئوية |
كمية العينة المطلوبة لكل منها | Room Temperature~500degree centigrade |
تقلب درجات الحرارة | ± 0.2 ℃ |
توحيد درجة الحرارة | ± 1 |
دقة عرض درجة الحرارة | 0.1℃ |
دقة العرض | 0.1℃ |
الحد الأقصى من comsuption | < 600دبليو |
دقة عرض الوقت | 0.1أن لزوجة الطلاء صغيرة جدًا |
معلمات الوزن هي كما يلي: | |
دقة الوزن | ± 0.5٪ |
التكوين الأساسي
| 0.325 كجم |
ب 1.2 كجم | |
ج 2.16 كجم | |
د 3.8 كجم | |
ه 5 كجم | |
وزن 10 كجم | |
ز 12.5 كجم | |
H 21.6 كجم | |
كشف الموقف | |
مسافة الحلقة من أعلى وأسفل | 30مم |
دقة التحكم | ± 0.1 مم |
اختبار التحكم في التدفق | |
أوقات قطع المادة | 0~ 10 مرات |
الفاصل الزمني لقطع المواد | 0~999s(تعيين الجدول المرجعي 2) |
يصل تدفق التحكم إلى درجة الحرارة المحددة دون تقلب | |
وقت درجة حرارة البرميل | 15 الثورة وقوة الطرد المركزي. |
يتم تثبيت المواد | 1 الثورة وقوة الطرد المركزي. |
وقت استعادة درجة حرارة عينة المواد | 4 الثورة وقوة الطرد المركزي. |
عندما مجموعة الموثق | 1الثورة وقوة الطرد المركزي |
وضع الإخراج | إخراج طباعة أوتوماتيكي دقيق |
طرق قطع المواد | تقطع اليد آليًا إلى جسد واحد |
اختبار الحمل | ثماني مجموعات من الأوزان |
قوة | AC220V±10% 50/60HZ |
قائمة الملحقات
تشانغشا LONROY TECHNOLOGY CO LTD | اسم | الكمية | ملاحظة |
1 | وزن | 1 جلس | 0.325㎏、0.875㎏、1.835㎏、2.5㎏、2.915㎏、3.475㎏、4.615كلغ、5.0كلغ |
2 | صينية الوزن | 1جهاز كمبيوتر شخصى | ضمن المستوى 1 حمل |
3 | قادوس الشحن | 1جهاز كمبيوتر شخصى | |
4 | قضيب تنظيف قالب الفم | 1جهاز كمبيوتر شخصى | |
5 | شريط الشحن | 1جهاز كمبيوتر شخصى | |
6 | قضيب تنظيف الاسطوانة | 1جهاز كمبيوتر شخصى | |
7 | ذراع الكباس | 1جهاز كمبيوتر شخصى | |
8 | قالب الفم | 1جهاز كمبيوتر شخصى | |
9 | الشاش | 2تدحرج | |
10 | ورق طباعة | 2 تدحرج |
قوة الاختبار القياسية (8 مستوى)
1 مجموعة من تطبيق:0.325 كجم = (قضيب مكبس + صينية وزن + غطاء عازل للحرارة + لا 1 وزن)
= 3.187 شمالاً
2 مجموعة من تطبيق:1.200 كجم =(0.325+No2 0.875 وزن)= 11.77 شمالاً
3 مجموعة من تطبيق:2.160 كجم =(0.325+No3 1.835 وزن)= 21.18 شمالاً
4 مستوى:3.800 كجم =(0.325+رقم 4 3.475 الوزن)= 37.26 شمالاً
5 مستوى:5.000 كجم =(0.325+رقم 5 4.675 الوزن)= 49.03 شمالاً
6 مستوى:10.000 كجم =(0.325+رقم 5 الوزن 4.675 + رقم 6 5.000 الوزن)= 98.07 شمال
7 مستوى:12.000 كجم =(0.325+رقم 5 4.675 الوزن + رقم 6 5.000 + رقم 7 2.500 الوزن)= 122.58 شمالاً
8 مجموعة من تطبيق:21.600 كجم =(0.325+رقم 2 0.875 الوزن + رقم 3. 1.835+رقم 4
3.475+رقم 5 4.675 + رقم 6 5.000 + رقم 7 2.500 + رقم 8 2.915 وزن)= 211.82 شمالاً
List of components
تشانغشا LONROY TECHNOLOGY CO LTD | اسم | Unit | الكمية | ملاحظة |
1 | Relay | جلس | 3 | Taiwan YangMING |
2 | Temperature Sensor | جهاز كمبيوتر شخصى | 2 | UK RS PT100 |
3 | Power switch | جهاز كمبيوتر شخصى | 1 | Zheniang hongbo |
4 | Heating jacket | جهاز كمبيوتر شخصى | 2 | High temperature pure copper heating sleeve |
5 | مراقب (including touch screen) | جهاز كمبيوتر شخصى | 1 | Self-developed, intelligent multi-point temperature control system (including 7-inch touch screen) |
6 | Lifting motor | جهاز كمبيوتر شخصى | 1 | Taiwan puloviac AC motor |
7 | Cutting machine | جهاز كمبيوتر شخصى | 1 | Taiwan imports pulovid |
8 | Transformer | جهاز كمبيوتر شخصى | 1 | Guangzhou baiyun |
9 | Encoder | جهاز كمبيوتر شخصى | 1 | Japan’s original omron |
10 | Opening mould | جهاز كمبيوتر شخصى | 1 | Tungsten steel |
11 | Cylinder | جهاز كمبيوتر شخصى | 1 | The treatment of nitrification and corrosion resistance |
12 | Printer | جهاز كمبيوتر شخصى | 1 | Beijing weihuang |
جدول 1
تذوب معدل التدفق (ز / 10 دقيقة) | جودة العينة في برميل الشحن (ز) | بثق الفاصل الزمني للقطع (أن لزوجة الطلاء صغيرة جدًا) |
0.1-0.5 | 3-5 | 240 |
>0.5-1 | 4-6 | 120 |
>1-3.5 | 4-6 | 60 |
>3.5-10 | 6-8 | 30 |
>10 | 6-8 | 5-15 |
1. إذا كانت قيمة هذه التجربة أقل من 0.1 ز / 10 دقيقة أو أكبر من 100 ز / 10 الثورة وقوة الطرد المركزي, نقترح عليك تذوب معدل التدفق 2. عندما تكون كثافة المادة أكبر من 1.0 ز / 10 الثورة وقوة الطرد المركزي, قد تحتاج إلى زيادة حجم العينة. |
جدول 2
مواد | اختبار درجة الحرارةθ,℃ | Standard load mnom,كلغ |
PS | 200 | 5.00 |
PE | 190 | 2.16 |
PE | 190 | 0.325 |
PE | 190 | 21.60 |
PE | 190 | 5.00 |
PP | 230 | 2.16 |
ABS | 230 | 10.00 |
PS-1 | 200 | 5.00 |
E/VAC | 150 | 2.16 |
E/VAC | 190 | 2.16 |
E/VAC | 125 | 0.325 |
SAN | 220 | 10.00 |
ASA、ACS、AEC | 220 | 10.00 |
الكمبيوتر | 300 | 1.2 |
PMMA | 230 | 3.8 |
PB | 190 | 2.16 |
PB | 190 | 10.00 |
بوم | 190 | 2.16 |
MABS | 220 | 10.00 |
مليون اختبار